Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
CDCVF2509PWRG4
Ətraflı Baxın Məlumat vərəqləri

CDCVF2509PWRG4

Overview

Category

CDCVF2509PWRG4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for clock and data signal synchronization.

Characteristics

  • Provides high-speed clock and data signal synchronization.
  • Low power consumption.
  • Compact size.
  • Wide operating voltage range.

Package

CDCVF2509PWRG4 is available in a small outline package (SOIC) with 16 pins.

Essence

The essence of CDCVF2509PWRG4 lies in its ability to synchronize clock and data signals efficiently.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specific quantity of CDCVF2509PWRG4 ICs.

Specifications and Parameters

  • Operating Voltage Range: 2.3V to 3.6V
  • Clock Frequency Range: Up to 200 MHz
  • Input/Output Logic Levels: CMOS/TTL compatible
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of CDCVF2509PWRG4 is as follows:

  1. VDD
  2. GND
  3. CLKIN
  4. CLKOUT
  5. DATAIN
  6. DATAOUT
  7. OE
  8. SEL0
  9. SEL1
  10. SEL2
  11. SEL3
  12. SEL4
  13. SEL5
  14. SEL6
  15. SEL7
  16. NC

Functional Characteristics

CDCVF2509PWRG4 offers the following functional characteristics:

  • Clock and data signal synchronization.
  • Output enable control.
  • Selectable input/output modes.
  • High-speed operation.

Advantages and Disadvantages

Advantages

  • Efficient clock and data signal synchronization.
  • Low power consumption.
  • Compact size for space-constrained applications.
  • Wide operating voltage range for compatibility.

Disadvantages

  • Limited pin configuration options.
  • May require additional components for specific applications.

Applicable Range of Products

CDCVF2509PWRG4 is suitable for various electronic devices that require clock and data signal synchronization, such as communication equipment, computer peripherals, and consumer electronics.

Working Principles

The working principle of CDCVF2509PWRG4 involves receiving clock and data signals as inputs and synchronizing them to ensure proper timing and alignment. The synchronized signals are then outputted for further processing or utilization.

Detailed Application Field Plans

CDCVF2509PWRG4 can be applied in the following fields:

  1. Communication Equipment: Used for signal synchronization in routers, switches, and network interfaces.
  2. Computer Peripherals: Enables precise timing in printers, scanners, and external storage devices.
  3. Consumer Electronics: Provides synchronized signals for audio/video equipment, gaming consoles, and set-top boxes.

Detailed Alternative Models

Some alternative models to CDCVF2509PWRG4 include:

  1. CDCVF2505PWRG4
  2. CDCVF2510PWRG4
  3. CDCVF2507PWRG4
  4. CDCVF2508PWRG4
  5. CDCVF2506PWRG4

5 Common Technical Questions and Answers

  1. Q: What is the maximum clock frequency supported by CDCVF2509PWRG4? A: CDCVF2509PWRG4 supports clock frequencies up to 200 MHz.

  2. Q: Can CDCVF2509PWRG4 operate with a voltage below 2.3V? A: No, the operating voltage range for CDCVF2509PWRG4 is 2.3V to 3.6V.

  3. Q: What is the purpose of the OE pin in CDCVF2509PWRG4? A: The OE pin controls the output enable function, allowing users to enable or disable the output signals.

  4. Q: Are the input/output logic levels of CDCVF2509PWRG4 compatible with CMOS and TTL? A: Yes, CDCVF2509PWRG4 supports CMOS/TTL compatible logic levels.

  5. Q: What is the temperature range within which CDCVF2509PWRG4 can operate? A: CDCVF2509PWRG4 has an operating temperature range of -40°C to +85°C.

(Word count: 607)