Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
INA159AMDGKTEP
Ətraflı Baxın Məlumat vərəqləri

INA159AMDGKTEP

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Current Shunt Monitor
  • Characteristics: High accuracy, low offset voltage, wide supply range
  • Package: 8-VSSOP
  • Essence: Precision current sensing
  • Packaging/Quantity: Tape & Reel (2500 units)

Specifications

  • Supply Voltage: 2.7V to 36V
  • Input Offset Voltage: ±150µV
  • Gain Bandwidth Product: 500kHz
  • Common Mode Rejection Ratio (CMRR): 100dB
  • Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. V+
  2. V-
  3. OUT
  4. REF
  5. GND
  6. SET
  7. IN-
  8. IN+

Functional Features

  • High precision current measurement
  • Wide supply voltage range
  • Low offset voltage
  • High common mode rejection ratio

Advantages and Disadvantages

Advantages

  • High accuracy
  • Wide supply range
  • Small package size

Disadvantages

  • Limited temperature range (-40°C to 125°C)
  • Higher cost compared to some alternatives

Working Principles

The INA159AMDGKTEP operates by measuring the voltage across a shunt resistor in a circuit, allowing for precise current monitoring.

Detailed Application Field Plans

This device is suitable for various applications including: - Battery management systems - Power supplies - Motor control - Solar inverters

Detailed and Complete Alternative Models

  • INA180
  • INA199
  • MAX4372

Note: The above information is for reference purposes only. Always refer to the manufacturer's datasheet for accurate details.

Word Count: 292

Texniki həllərdə INA159AMDGKTEP tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the INA159AMDGKTEP?

    • The INA159AMDGKTEP is a high-side current shunt monitor that provides an output voltage proportional to the current flowing through a shunt resistor.

  2. What is the typical application of the INA159AMDGKTEP?

    • It is commonly used for overcurrent protection, battery management systems, motor control, and power management in various technical solutions.

  3. What is the operating voltage range of the INA159AMDGKTEP?

    • The operating voltage range is typically from 2.7V to 36V.

  4. What is the output voltage range of the INA159AMDGKTEP?

    • The output voltage range is typically from 0V to Vcc – 1.3V.

  5. What is the accuracy of the INA159AMDGKTEP?

    • The device offers high accuracy with low offset voltage and gain error, making it suitable for precise current measurements.

  6. How does the INA159AMDGKTEP help in overcurrent protection?

    • It can monitor the current flowing through a circuit and provide a signal to trigger protective measures when the current exceeds a set threshold.

  7. Can the INA159AMDGKTEP be used in automotive applications?

    • Yes, it is suitable for automotive applications due to its wide operating voltage range and robust design.

  8. What are the key features of the INA159AMDGKTEP?

    • Some key features include low quiescent current, wide common-mode voltage range, and integrated precision voltage reference.

  9. How is the INA159AMDGKTEP typically connected in a circuit?

    • It is often connected in series with a shunt resistor and the load to measure the current passing through the load.

  10. Is the INA159AMDGKTEP available in a small package for space-constrained applications?

    • Yes, it is available in a small MSOP-8 package, making it suitable for space-constrained designs.