Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
INA214BIDCKT
Ətraflı Baxın Məlumat vərəqləri

INA214BIDCKT

Product Overview

Category

The INA214BIDCKT belongs to the category of precision current shunt monitors.

Use

It is used for monitoring current in high-side shunt resistor applications.

Characteristics

  • High accuracy
  • Wide input common-mode voltage range
  • Low quiescent current
  • Small package size

Package

The INA214BIDCKT comes in a small SOT-23 package.

Essence

The essence of the INA214BIDCKT lies in its precise monitoring of current in high-side shunt resistor applications.

Packaging/Quantity

The INA214BIDCKT is typically available in reels with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 26V
  • Supply Voltage Range: 2.7V to 5.5V
  • Quiescent Current: 60µA
  • Gain Error: ±0.5%
  • Bandwidth: 100kHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The INA214BIDCKT has the following pin configuration: 1. V+ 2. V- 3. OUT 4. REF 5. SET 6. GND

Functional Features

  • High accuracy current sensing
  • Wide input voltage range
  • Low power consumption
  • Integrated precision voltage reference

Advantages and Disadvantages

Advantages

  • High accuracy
  • Wide input voltage range
  • Low power consumption

Disadvantages

  • Limited bandwidth compared to some alternatives
  • Higher cost compared to some alternatives

Working Principles

The INA214BIDCKT works by measuring the voltage across a shunt resistor to accurately determine the current flowing through it. It then amplifies and outputs this information for further processing.

Detailed Application Field Plans

The INA214BIDCKT is commonly used in various applications such as: - Battery management systems - Power management in industrial equipment - Motor control systems - Solar inverters

Detailed and Complete Alternative Models

Some alternative models to the INA214BIDCKT include: - INA210 - INA211 - INA212 - INA213

These alternatives offer similar functionality with slight variations in specifications and features.

In conclusion, the INA214BIDCKT is a precision current shunt monitor that offers high accuracy and wide input voltage range, making it suitable for various current monitoring applications.

[Word count: 345]

Texniki həllərdə INA214BIDCKT tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure, here are 10 common questions and answers related to the application of INA214BIDCKT in technical solutions:

  1. What is the INA214BIDCKT?

    • The INA214BIDCKT is a precision current shunt monitor with an integrated voltage reference. It can be used to measure current in various applications.

  2. What is the typical supply voltage range for the INA214BIDCKT?

    • The typical supply voltage range for the INA214BIDCKT is 2.7V to 5.5V.

  3. What is the maximum input common-mode voltage range of the INA214BIDCKT?

    • The maximum input common-mode voltage range of the INA214BIDCKT is from 0V to V+.

  4. How does the INA214BIDCKT help in current sensing applications?

    • The INA214BIDCKT provides accurate current measurements by amplifying the voltage drop across a shunt resistor and providing it as an output voltage.

  5. What is the typical gain error of the INA214BIDCKT?

    • The typical gain error of the INA214BIDCKT is ±0.5%.

  6. Can the INA214BIDCKT be used in high-side or low-side current sensing applications?

    • Yes, the INA214BIDCKT can be used in both high-side and low-side current sensing applications.

  7. What is the bandwidth of the INA214BIDCKT?

    • The bandwidth of the INA214BIDCKT is typically 350kHz.

  8. How does the INA214BIDCKT handle overcurrent conditions?

    • The INA214BIDCKT has built-in overcurrent detection and reporting features to help protect the system during overcurrent conditions.

  9. What is the temperature range for the operation of the INA214BIDCKT?

    • The temperature range for the operation of the INA214BIDCKT is typically from -40°C to 125°C.

  10. Can the INA214BIDCKT be used in battery management systems?

    • Yes, the INA214BIDCKT can be used in battery management systems for monitoring charging and discharging currents.

I hope these questions and answers provide a good overview of the application of INA214BIDCKT in technical solutions. Let me know if you need further information on any specific aspect!