Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
LM358AM/NOPB
Ətraflı Baxın Məlumat vərəqləri

LM358AM/NOPB

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low power, dual operational amplifier
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: The LM358AM/NOPB is a versatile operational amplifier that can be used in various applications requiring amplification and signal conditioning.
  • Packaging/Quantity: Available in reels of 2500 units or tubes of 50 units.

Specifications

  • Supply Voltage: 3V to 32V
  • Input Offset Voltage: 2mV (maximum)
  • Input Bias Current: 20nA (maximum)
  • Gain Bandwidth Product: 1.1MHz (typical)
  • Slew Rate: 0.6V/μs (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The LM358AM/NOPB has the following pin configuration:

___________ VCC | 1 8 | Vout Vin-| 2 7 | Vin+ GND | 3 6 | Output NC | 4 5 | NC ‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • Dual operational amplifier in a single package
  • Low power consumption
  • Wide supply voltage range
  • High gain bandwidth product
  • Low input offset voltage and bias current
  • Short-circuit protection
  • Internal frequency compensation

Advantages and Disadvantages

Advantages: - Versatile and widely used in various applications - Low power consumption makes it suitable for battery-powered devices - High gain bandwidth product allows for accurate amplification of signals - Short-circuit protection ensures device safety

Disadvantages: - Limited output current capability - Not suitable for high-frequency applications

Working Principles

The LM358AM/NOPB is an operational amplifier that amplifies the difference between its two input terminals. It operates by comparing the voltage at the non-inverting terminal (Vin+) with the voltage at the inverting terminal (Vin-). The amplified output signal is then available at the output pin.

Detailed Application Field Plans

The LM358AM/NOPB can be used in various applications, including but not limited to: 1. Signal conditioning and amplification in audio systems 2. Voltage and current measurement circuits 3. Sensor interfaces 4. Active filters 5. Oscillators and waveform generators 6. Comparators and voltage level detectors

Detailed and Complete Alternative Models

Some alternative models to the LM358AM/NOPB include: - LM324 - TL082 - MCP6002 - AD822

These alternatives offer similar functionality and can be used as replacements depending on specific requirements.

In conclusion, the LM358AM/NOPB is a versatile operational amplifier that offers low power consumption, high gain bandwidth product, and wide supply voltage range. Its compact package and functional features make it suitable for various applications in different fields.

Texniki həllərdə LM358AM/NOPB tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. Question: What is the LM358AM/NOPB used for?
    Answer: The LM358AM/NOPB is a dual operational amplifier that is commonly used in signal conditioning, voltage amplification, and active filter applications.

  2. Question: What is the supply voltage range for LM358AM/NOPB?
    Answer: The supply voltage range for LM358AM/NOPB is typically between 3V and 32V.

  3. Question: Can LM358AM/NOPB be used as a comparator?
    Answer: Yes, LM358AM/NOPB can be used as a comparator due to its high input impedance and wide supply voltage range.

  4. Question: What is the typical input offset voltage of LM358AM/NOPB?
    Answer: The typical input offset voltage of LM358AM/NOPB is around 2mV.

  5. Question: Is LM358AM/NOPB suitable for low-power applications?
    Answer: Yes, LM358AM/NOPB is suitable for low-power applications due to its low quiescent current consumption.

  6. Question: Can LM358AM/NOPB operate at high temperatures?
    Answer: Yes, LM358AM/NOPB has a wide temperature range and can operate at high temperatures, making it suitable for industrial applications.

  7. Question: What are the common package types for LM358AM/NOPB?
    Answer: The common package types for LM358AM/NOPB include SOIC, PDIP, and TSSOP.

  8. Question: Does LM358AM/NOPB require external compensation?
    Answer: No, LM358AM/NOPB does not require external compensation due to its internal frequency compensation.

  9. Question: Can LM358AM/NOPB be used in single-supply applications?
    Answer: Yes, LM358AM/NOPB can be used in single-supply applications with proper biasing.

  10. Question: What are the typical applications of LM358AM/NOPB?
    Answer: Typical applications of LM358AM/NOPB include audio amplifiers, sensor interfaces, and voltage followers.