Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
LM358PE3
Ətraflı Baxın Məlumat vərəqləri

LM358PE3

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low power, dual operational amplifier
  • Package: PDIP-8 (Plastic Dual In-line Package)
  • Essence: LM358PE3 is a versatile operational amplifier that can be used in various electronic circuits.
  • Packaging/Quantity: Available in tubes or reels, with 50 pieces per tube/reel.

Specifications

  • Supply Voltage: 3V to 32V
  • Input Offset Voltage: 2mV (maximum)
  • Input Bias Current: 20nA (maximum)
  • Input Offset Current: 2nA (maximum)
  • Gain Bandwidth Product: 1.3MHz (typical)
  • Slew Rate: 0.6V/μs (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The LM358PE3 has a total of 8 pins arranged as follows:

___________ VCC | 1 8 | OUT1 IN1 | 2 7 | IN2 IN2 | 3 6 | OUT2 GND | 4 5 | NC ‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • Low power consumption: The LM358PE3 operates at low supply voltages and consumes minimal power, making it suitable for battery-powered applications.
  • Dual operational amplifier: It contains two independent operational amplifiers in a single package, allowing for cost-effective circuit designs.
  • Wide operating voltage range: The IC can operate within a wide range of supply voltages, providing flexibility in various applications.
  • High gain bandwidth product: With a gain bandwidth product of 1.3MHz, the LM358PE3 can handle moderate-frequency signals accurately.
  • Low input offset voltage: The IC has a low input offset voltage, ensuring precise amplification of small input signals.

Advantages and Disadvantages

Advantages: - Low power consumption - Dual operational amplifier in a single package - Wide operating voltage range - High gain bandwidth product - Low input offset voltage

Disadvantages: - Limited slew rate compared to some other operational amplifiers - Not suitable for high-frequency applications

Working Principles

The LM358PE3 is based on a differential amplifier configuration, which amplifies the difference between its two input voltages. It utilizes internal transistors and resistors to achieve amplification and provide a stable output voltage. The IC operates by comparing the input voltages with a reference voltage and amplifying the resulting difference.

Detailed Application Field Plans

The LM358PE3 can be used in various electronic circuits, including but not limited to: - Signal conditioning circuits - Audio amplifiers - Voltage followers - Active filters - Comparators - Oscillators - Sensor interfaces

Detailed and Complete Alternative Models

Some alternative models that can be considered as replacements for the LM358PE3 are: - LM324: Quad operational amplifier with similar characteristics - TL072: Dual operational amplifier with higher slew rate - MCP6002: Dual operational amplifier with rail-to-rail inputs and outputs - AD822: Precision dual operational amplifier with low noise

These alternative models offer different features and specifications, allowing designers to choose the most suitable option for their specific application requirements.

Word count: 408 words

Texniki həllərdə LM358PE3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of LM358PE3 in technical solutions:

  1. Q: What is LM358PE3? A: LM358PE3 is a dual operational amplifier (op-amp) that is commonly used in various electronic circuits.

  2. Q: What is the voltage supply range for LM358PE3? A: The voltage supply range for LM358PE3 is typically between 3V and 32V.

  3. Q: Can LM358PE3 be used as a comparator? A: Yes, LM358PE3 can be used as a comparator by utilizing one of its op-amps as a comparator circuit.

  4. Q: What is the maximum output current of LM358PE3? A: The maximum output current of LM358PE3 is typically around 20mA.

  5. Q: Is LM358PE3 suitable for low-power applications? A: Yes, LM358PE3 is suitable for low-power applications as it has a low quiescent current consumption.

  6. Q: Can LM358PE3 operate in single-supply mode? A: Yes, LM358PE3 can operate in single-supply mode by connecting the non-inverting input to a reference voltage.

  7. Q: What is the common-mode input voltage range of LM358PE3? A: The common-mode input voltage range of LM358PE3 typically includes the negative supply rail up to a few volts below the positive supply rail.

  8. Q: Can LM358PE3 be used in audio applications? A: Yes, LM358PE3 can be used in audio applications such as preamplifiers or audio mixers.

  9. Q: Does LM358PE3 have built-in protection features? A: No, LM358PE3 does not have built-in protection features. External protection components may be required for certain applications.

  10. Q: What is the temperature range for LM358PE3? A: The temperature range for LM358PE3 is typically between -40°C and 125°C.

Please note that the answers provided are general and may vary depending on specific datasheet specifications and application requirements.