MSP430F6736IPZ

Product Overview

Category

The MSP430F6736IPZ belongs to the category of microcontrollers.

Use

It is primarily used for embedded systems and low-power applications.

Characteristics

• Low power consumption
• High performance
• Integrated peripherals
• Small form factor

Package

The MSP430F6736IPZ comes in a 100-pin LQFP (Low Profile Quad Flat Package) package.

Essence

The essence of the MSP430F6736IPZ lies in its ability to provide efficient processing capabilities while consuming minimal power.

Packaging/Quantity

The MSP430F6736IPZ is typically packaged individually and is available in various quantities depending on the supplier.

Specifications

• Architecture: 16-bit RISC
• CPU Speed: Up to 25 MHz
• Flash Memory: 256 KB
• RAM: 16 KB
• Operating Voltage Range: 1.8V to 3.6V
• Digital I/O Pins: 80
• Analog Inputs: 12
• Serial Communication Interfaces: UART, SPI, I2C
• Timers: 4x 16-bit TimerA, 1x 16-bit TimerB
• ADC Resolution: 12-bit
• PWM Outputs: 8
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MSP430F6736IPZ has a total of 100 pins. The pin configuration is as follows:

• P1.x: Digital I/O pins (x = 0 to 7)
• P2.x: Digital I/O pins (x = 0 to 7)
• P3.x: Digital I/O pins (x = 0 to 7)
• P4.x: Digital I/O pins (x = 0 to 7)
• P5.x: Digital I/O pins (x = 0 to 7)
• P6.x: Digital I/O pins (x = 0 to 7)
• P7.x: Digital I/O pins (x = 0 to 7)
• P8.x: Digital I/O pins (x = 0 to 7)
• P9.x: Digital I/O pins (x = 0 to 7)
• P10.x: Digital I/O pins (x = 0 to 7)
• A0-A11: Analog input pins
• AVSS: Analog ground
• AVCC: Analog power supply
• DVSS: Digital ground
• DVCC: Digital power supply
• RST/NMI: Reset and non-maskable interrupt pin
• TEST/SBWTCK: Test and Spy-Bi-Wire clock pin
• TDI/TCLK: Test data input and test clock pin
• TDO/TMS: Test data output and test mode select pin
• TCK/TDI: Test clock and test data input pin
• TMS/TDO: Test mode select and test data output pin

Functional Features

The MSP430F6736IPZ offers the following functional features:

1. Low Power Consumption: The microcontroller is designed to operate at low power levels, making it suitable for battery-powered applications.
2. Integrated Peripherals: It includes a wide range of integrated peripherals such as UART, SPI, I2C, timers, ADC, and PWM outputs, providing flexibility in system design.
3. High Performance: With a 16-bit RISC architecture and CPU speed of up to 25 MHz, the MSP430F6736IPZ delivers efficient processing capabilities.
4. Small Form Factor: The compact package size allows for space-efficient designs in various applications.

Advantages and Disadvantages

Advantages

• Low power consumption extends battery life in portable devices.
• Integrated peripherals reduce the need for external components, simplifying circuit design.
• High-performance architecture enables efficient processing of complex tasks.
• Small form factor allows for compact and space-efficient designs.

Disadvantages

• Limited memory capacity compared to some other microcontrollers.
• Higher cost compared to lower-end microcontrollers with similar features.
• Steeper learning curve for beginners due to its advanced architecture.

Working Principles

The MSP430F6736IPZ operates based on a 16-bit RISC architecture. It executes instructions stored in its flash memory using a reduced instruction set, which allows for efficient execution and low power consumption. The microcontroller communicates with external devices through its integrated peripherals, such as UART, SPI, and I2C interfaces. It can perform analog-to-digital conversions using its built-in ADC and generate PWM signals for controlling various outputs. The MSP430F6736IPZ's working principles revolve around providing high performance while minimizing power consumption.

Detailed Application Field Plans

The MSP430F6736IPZ is suitable for a wide range of applications