Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MSP430F67751IPZ
Ətraflı Baxın Məlumat vərəqləri

MSP430F67751IPZ

Product Overview

Category

The MSP430F67751IPZ belongs to the category of microcontrollers.

Use

This microcontroller is designed for various embedded applications that require low power consumption and high performance.

Characteristics

  • Low power consumption: The MSP430F67751IPZ is known for its ultra-low power consumption, making it suitable for battery-powered devices.
  • High performance: Despite its low power consumption, this microcontroller offers high processing capabilities, enabling efficient execution of complex tasks.
  • Integrated peripherals: It comes with a wide range of integrated peripherals such as timers, UART, SPI, I2C, and ADC, providing flexibility for different application requirements.

Package

The MSP430F67751IPZ is available in a small form factor package, specifically the LQFP (Low Profile Quad Flat Package).

Essence

The essence of the MSP430F67751IPZ lies in its ability to provide a balance between power efficiency and high performance, making it an ideal choice for energy-constrained applications.

Packaging/Quantity

This microcontroller is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Microcontroller core: MSP430X CPU
  • Clock frequency: Up to 25 MHz
  • Flash memory: 512 KB
  • RAM: 32 KB
  • Operating voltage: 1.8V - 3.6V
  • Digital I/O pins: 48
  • Analog input channels: 16
  • Communication interfaces: UART, SPI, I2C
  • Timers: 4x 16-bit timers
  • ADC resolution: 12-bit
  • Temperature sensor: Yes
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The MSP430F67751IPZ has a total of 64 pins. The pin configuration is as follows:

  • P1.x: Digital I/O pins (x = 0 to 7)
  • P2.x: Digital I/O pins (x = 0 to 7)
  • P3.x: Digital I/O pins (x = 0 to 7)
  • P4.x: Digital I/O pins (x = 0 to 7)
  • P5.x: Digital I/O pins (x = 0 to 7)
  • P6.x: Digital I/O pins (x = 0 to 7)
  • P7.x: Digital I/O pins (x = 0 to 7)
  • P8.x: Digital I/O pins (x = 0 to 7)
  • P9.x: Digital I/O pins (x = 0 to 7)
  • P10.x: Digital I/O pins (x = 0 to 7)
  • A0-A15: Analog input channels
  • AVSS: Analog ground
  • AVCC: Analog power supply
  • DVSS: Digital ground
  • DVCC: Digital power supply
  • RST: Reset pin
  • TEST: Test pin
  • XIN: Crystal oscillator input
  • XOUT: Crystal oscillator output

Functional Features

The MSP430F67751IPZ offers the following functional features:

  • Low-power modes: It provides various low-power modes, allowing the microcontroller to operate in energy-efficient states when idle or not actively processing tasks.
  • Integrated peripherals: The microcontroller includes a rich set of integrated peripherals such as UART, SPI, and I2C, enabling seamless communication with external devices.
  • Real-time clock: It incorporates a real-time clock module, facilitating timekeeping and scheduling operations.
  • Enhanced security: The microcontroller supports hardware-based encryption and decryption algorithms, ensuring data security in sensitive applications.

Advantages and Disadvantages

Advantages

  • Ultra-low power consumption, ideal for battery-powered devices.
  • High processing capabilities despite low power consumption.
  • Integrated peripherals provide flexibility for various application requirements.
  • Small form factor package allows for space-efficient designs.

Disadvantages

  • Limited flash memory and RAM compared to some other microcontrollers in the same category.
  • Higher cost compared to entry-level microcontrollers with similar specifications.

Working Principles

The MSP430F67751IPZ operates based on the Harvard architecture, which separates program memory and data memory. It executes instructions fetched from the flash memory and stores data in the RAM. The microcontroller follows a Von Neumann execution model, where it fetches and executes instructions sequentially.

It utilizes low-power modes to minimize energy consumption during idle periods. The integrated peripherals enable communication with external devices, facilitating data exchange and control operations.

Detailed Application Field Plans

The MSP430F67751IPZ finds applications in various fields, including but not limited to:

  1. Internet of Things (IoT) devices: Its low power consumption and integrated peripherals make it suitable for IoT applications such as smart

Texniki həllərdə MSP430F67751IPZ tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MSP430F67751IPZ in technical solutions:

  1. Q: What is MSP430F67751IPZ? A: MSP430F67751IPZ is a microcontroller from Texas Instruments' MSP430 family, specifically designed for embedded applications.

  2. Q: What are the key features of MSP430F67751IPZ? A: Some key features include a 16-bit RISC CPU, up to 256KB flash memory, 16KB RAM, multiple communication interfaces, analog-to-digital converters, and low power consumption.

  3. Q: What kind of technical solutions can MSP430F67751IPZ be used for? A: MSP430F67751IPZ can be used in various technical solutions such as industrial automation, smart energy management, home automation, wearable devices, and Internet of Things (IoT) applications.

  4. Q: How does MSP430F67751IPZ ensure low power consumption? A: The microcontroller incorporates various power-saving modes, such as standby mode, sleep mode, and real-time clock mode, along with efficient power management techniques to minimize power consumption.

  5. Q: Can MSP430F67751IPZ communicate with other devices? A: Yes, MSP430F67751IPZ supports multiple communication interfaces like UART, SPI, I2C, and USB, enabling seamless communication with other devices or peripherals.

  6. Q: Does MSP430F67751IPZ have built-in analog-to-digital converters (ADC)? A: Yes, MSP430F67751IPZ has integrated ADCs, allowing it to interface with analog sensors or signals and convert them into digital values for processing.

  7. Q: Can MSP430F67751IPZ be programmed using a high-level language? A: Yes, MSP430F67751IPZ can be programmed using various high-level languages like C or C++, along with the appropriate development tools and software provided by Texas Instruments.

  8. Q: Is MSP430F67751IPZ suitable for battery-powered applications? A: Yes, MSP430F67751IPZ is well-suited for battery-powered applications due to its low power consumption capabilities, allowing for extended battery life.

  9. Q: Can MSP430F67751IPZ be used in safety-critical applications? A: Yes, MSP430F67751IPZ is designed to meet safety standards and has features like watchdog timers, error correction codes, and memory protection units, making it suitable for safety-critical applications.

  10. Q: Are there any development boards or evaluation kits available for MSP430F67751IPZ? A: Yes, Texas Instruments provides development boards and evaluation kits specifically designed for MSP430 microcontrollers, including MSP430F67751IPZ, which can help in prototyping and development of technical solutions.

Please note that the specific details and answers may vary depending on the context and requirements of the application.