Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MSP430FR5988IRGCT

MSP430FR5988IRGCT

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, Internet of Things (IoT) devices
  • Characteristics:
    • Low power consumption
    • High performance
    • Integrated peripherals
  • Package: QFN-64
  • Essence: Advanced microcontroller with integrated FRAM memory
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Architecture: 16-bit RISC
  • CPU Speed: Up to 16 MHz
  • Flash Memory: 128 KB
  • RAM: 4 KB
  • FRAM: 256 KB
  • Operating Voltage Range: 1.8V to 3.6V
  • Digital I/O Pins: 48
  • Analog Inputs: 24
  • Communication Interfaces: UART, SPI, I2C, USB
  • Timers: 4x 16-bit, 1x 32-bit
  • ADC Resolution: 12-bit
  • Temperature Sensor: Yes
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MSP430FR5988IRGCT has a total of 64 pins. The pin configuration is as follows:

  • P1.x: General-purpose I/O pins
  • P2.x: General-purpose I/O pins
  • P3.x: General-purpose I/O pins
  • P4.x: General-purpose I/O pins
  • P5.x: General-purpose I/O pins
  • P6.x: General-purpose I/O pins
  • P7.x: General-purpose I/O pins
  • P8.x: General-purpose I/O pins
  • P9.x: General-purpose I/O pins
  • P10.x: General-purpose I/O pins
  • A0-A23: Analog input pins
  • TA0-TA4: Timer capture/compare pins
  • UCA0-UCA2: UART communication pins
  • USCIB0-USCIB1: I2C communication pins
  • USCIA0-USCIA1: SPI communication pins
  • USB D+/D-: USB communication pins

Functional Features

  • Low power consumption: The MSP430FR5988IRGCT is designed to operate with minimal power, making it suitable for battery-powered devices.
  • Integrated peripherals: The microcontroller includes various peripherals such as UART, SPI, I2C, and USB interfaces, allowing easy integration with other devices.
  • FRAM memory: The integrated FRAM memory offers non-volatile storage with fast read/write access and high endurance.
  • High performance: With a 16-bit RISC architecture and clock speed of up to 16 MHz, the MSP430FR5988IRGCT provides efficient processing capabilities.
  • Temperature sensor: The built-in temperature sensor enables accurate temperature measurement without the need for external components.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life in portable devices. - Integrated peripherals simplify system design and reduce component count. - FRAM memory provides fast and reliable non-volatile storage. - High-performance architecture enables efficient processing.

Disadvantages: - Limited flash memory capacity compared to some other microcontrollers. - Higher cost compared to lower-end microcontrollers with similar features.

Working Principles

The MSP430FR5988IRGCT operates based on a 16-bit RISC architecture. It executes instructions fetched from its memory using a pipeline structure, enabling efficient processing. The microcontroller can communicate with external devices through its integrated peripherals, including UART, SPI, I2C, and USB interfaces. It also features analog inputs for reading sensor data and timers for precise timing control. The low power consumption of the MSP430FR5988IRGCT is achieved through various power-saving modes and intelligent clock management.

Detailed Application Field Plans

The MSP430FR5988IRGCT is suitable for a wide range of applications, including but not limited to:

  1. Internet of Things (IoT) devices: The low power consumption and integrated peripherals make it ideal for IoT applications such as smart home devices, environmental monitoring systems, and wearable devices.
  2. Industrial automation: The microcontroller's high performance and communication interfaces enable its use in industrial control systems, motor control, and data acquisition applications.
  3. Medical devices: The MSP430FR5988IRGCT's low power consumption and analog inputs make it suitable for medical devices like patient monitors, portable diagnostic equipment, and implantable devices.
  4. Consumer electronics: With its integrated peripherals and FRAM memory, the microcontroller can be used in various consumer electronic devices such as remote controls, gaming consoles, and audio systems.

Detailed and Complete Alternative Models

  • MSP430FR5994IRGCR
  • MSP430FR5969IRGCR
  • MSP430FR6989IRGCR
  • MSP430FR4133IRGZT

Texniki həllərdə MSP430FR5988IRGCT tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. Question: What is the maximum operating frequency of MSP430FR5988IRGCT?
    Answer: The maximum operating frequency of MSP430FR5988IRGCT is 16 MHz.

  2. Question: Can MSP430FR5988IRGCT be used for battery-powered applications?
    Answer: Yes, MSP430FR5988IRGCT is suitable for battery-powered applications due to its low power consumption.

  3. Question: What are the available communication interfaces on MSP430FR5988IRGCT?
    Answer: MSP430FR5988IRGCT features UART, SPI, and I2C communication interfaces.

  4. Question: Does MSP430FR5988IRGCT have built-in analog-to-digital converters (ADC)?
    Answer: Yes, MSP430FR5988IRGCT includes integrated 24-bit sigma-delta ADCs.

  5. Question: Is MSP430FR5988IRGCT suitable for real-time control applications?
    Answer: Yes, MSP430FR5988IRGCT is well-suited for real-time control applications due to its low-power performance and integrated peripherals.

  6. Question: What is the memory configuration of MSP430FR5988IRGCT?
    Answer: MSP430FR5988IRGCT has 64KB of FRAM and 2KB of SRAM.

  7. Question: Can MSP430FR5988IRGCT operate in extended temperature ranges?
    Answer: Yes, MSP430FR5988IRGCT is designed to operate in extended temperature ranges, making it suitable for industrial applications.

  8. Question: Are there any development tools available for MSP430FR5988IRGCT?
    Answer: Yes, there are various development tools and software libraries available for MSP430FR5988IRGCT, including Code Composer Studio and MSP430Ware.

  9. Question: What security features does MSP430FR5988IRGCT offer?
    Answer: MSP430FR5988IRGCT provides hardware-based security features such as a 256-bit AES encryption accelerator and a random number generator.

  10. Question: Can MSP430FR5988IRGCT be used in low-power sensor nodes?
    Answer: Yes, MSP430FR5988IRGCT is ideal for low-power sensor node applications, offering efficient processing and low energy consumption.