Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
OPA2364AIDGKT
Ətraflı Baxın Məlumat vərəqləri

OPA2364AIDGKT

Introduction

The OPA2364AIDGKT is a precision, low-power, low-noise operational amplifier (op-amp) belonging to the category of integrated circuits. This device is commonly used in various electronic applications due to its unique characteristics and performance.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Signal amplification and conditioning
  • Characteristics: Precision, low-power, low-noise
  • Package: VSSOP (Very Small Outline Package)
  • Essence: High-performance operational amplifier
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Supply Voltage: ±1.35V to ±18V
  • Input Offset Voltage: 150µV (max)
  • Gain Bandwidth Product: 10MHz
  • Slew Rate: 5V/µs
  • Quiescent Current: 600µA (max)

Detailed Pin Configuration

The OPA2364AIDGKT has a standard pin configuration with two input pins (non-inverting and inverting), one output pin, and power supply pins. The pinout is as follows: 1. OUT: Output 2. IN-: Inverting Input 3. IN+: Non-Inverting Input 4. V-: Negative Power Supply 5. NC: Not Connected 6. V+: Positive Power Supply

Functional Features

  • Low offset voltage and drift for precision applications
  • Low quiescent current for power-sensitive designs
  • Rail-to-rail input and output for wide dynamic range
  • Low noise for high-fidelity signal processing

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Low power consumption
  • Wide supply voltage range
  • Small package size for space-constrained designs

Disadvantages

  • Limited output current capability
  • Sensitive to electromagnetic interference in certain environments

Working Principles

The OPA2364AIDGKT operates based on the principles of differential amplification and feedback control. It amplifies the voltage difference between its input terminals while maintaining stability and linearity.

Detailed Application Field Plans

This op-amp is well-suited for various applications including: - Sensor signal conditioning - Portable instrumentation - Audio pre-amplification - Battery-powered devices - Precision voltage/current measurement

Detailed and Complete Alternative Models

  • OPA2364AQDRQ1
  • OPA2364AIDR
  • OPA2364AIDRBT
  • OPA2364AIDRCT
  • OPA2364AIDRGT

In conclusion, the OPA2364AIDGKT is a versatile and high-performance operational amplifier suitable for a wide range of precision electronic applications.

[Word Count: 386]

Texniki həllərdə OPA2364AIDGKT tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the OPA2364AIDGKT?

    • The OPA2364AIDGKT is a dual-channel, low-power, precision operational amplifier designed for applications requiring low offset voltage and low input bias current.

  2. What are the key features of the OPA2364AIDGKT?

    • The OPA2364AIDGKT features low offset voltage, low input bias current, low noise, and low power consumption, making it suitable for precision signal conditioning and sensor interface applications.

  3. What is the typical supply voltage range for the OPA2364AIDGKT?

    • The OPA2364AIDGKT typically operates from a single or dual power supply ranging from +2.7V to +5.5V.

  4. What are some common applications for the OPA2364AIDGKT?

    • Common applications include sensor interfaces, precision instrumentation, data acquisition systems, and battery-powered equipment.

  5. What is the input offset voltage of the OPA2364AIDGKT?

    • The input offset voltage is typically very low, in the microvolt range, ensuring accurate signal processing.

  6. Does the OPA2364AIDGKT have rail-to-rail output capability?

    • Yes, the OPA2364AIDGKT provides rail-to-rail output swing, enabling maximum dynamic range in the output signal.

  7. What is the input bias current of the OPA2364AIDGKT?

    • The input bias current is typically very low, minimizing errors in high-impedance sensor applications.

  8. Is the OPA2364AIDGKT unity-gain stable?

    • Yes, the OPA2364AIDGKT is unity-gain stable, allowing for use in various gain configurations without stability concerns.

  9. What is the temperature range for the OPA2364AIDGKT?

    • The OPA2364AIDGKT is specified to operate over a wide temperature range, typically from -40°C to +125°C, making it suitable for harsh environments.

  10. Does the OPA2364AIDGKT require external compensation components?

    • No, the OPA2364AIDGKT is internally compensated, simplifying circuit design and reducing external component count.