Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TL074ID

TL074ID

Product Overview

Category: Integrated Circuit (IC)

Use: TL074ID is a quad operational amplifier that is widely used in various electronic circuits for amplification, filtering, and signal conditioning purposes.

Characteristics: - High gain bandwidth product - Low input bias current - Wide supply voltage range - Low noise - High slew rate

Package: TL074ID is available in an 8-pin dual in-line package (DIP) with a standard pin configuration.

Essence: TL074ID is designed to provide high-performance operational amplification in a compact and versatile package.

Packaging/Quantity: TL074ID is typically sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier.

Specifications

  • Supply Voltage Range: ±3V to ±18V
  • Input Offset Voltage: 3mV (maximum)
  • Input Bias Current: 30nA (maximum)
  • Gain Bandwidth Product: 4MHz (typical)
  • Slew Rate: 13V/µs (typical)
  • Common Mode Rejection Ratio: 100dB (typical)
  • Operating Temperature Range: -40°C to +105°C

Pin Configuration

The TL074ID IC has the following pin configuration:

___________ VCC | 1 8 | VCC+ IN1- | 2 7 | OUT1 IN1+ | 3 6 | IN2- IN2+ | 4 5 | IN2 ‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  1. High Gain Bandwidth Product: TL074ID offers a wide gain bandwidth product of 4MHz, allowing for accurate amplification of high-frequency signals.

  2. Low Input Bias Current: With a maximum input bias current of 30nA, TL074ID ensures minimal loading on the input signal source.

  3. Wide Supply Voltage Range: The IC can operate within a wide supply voltage range of ±3V to ±18V, making it suitable for various power supply configurations.

  4. Low Noise: TL074ID exhibits low noise characteristics, enabling precise signal amplification in noise-sensitive applications.

  5. High Slew Rate: The IC has a high slew rate of 13V/µs, facilitating fast and accurate signal processing.

Advantages and Disadvantages

Advantages: - Versatile and widely used in various electronic circuits - High gain bandwidth product for accurate signal amplification - Low input bias current minimizes loading on the input source - Wide supply voltage range allows for flexible power supply configurations - Low noise characteristics ensure precise signal amplification - High slew rate enables fast and accurate signal processing

Disadvantages: - Limited number of operational amplifiers (quad) compared to other ICs with more amplifiers in a single package - Relatively higher cost compared to single operational amplifier ICs

Working Principles

TL074ID operates based on the principles of operational amplifiers. It consists of four independent amplifiers that can be used individually or in combination. Each amplifier has a differential input stage, followed by a gain stage and an output stage. The amplifiers are internally compensated to provide stability and prevent oscillations.

The input signals are amplified by the gain stage, and the amplified output is available at the respective output pins. The amplifiers can be configured in various modes, such as inverting, non-inverting, summing, and difference amplifiers, depending on the application requirements.

Detailed Application Field Plans

TL074ID finds extensive application in various electronic circuits, including but not limited to: - Audio amplifiers - Active filters - Instrumentation amplifiers - Signal conditioners - Oscillators - Voltage regulators - Function generators

Detailed and Complete Alternative Models

Some alternative models that can be used as substitutes for TL074ID include: - LM324 - TL084 - NE5532 - OP07 - AD712

These alternatives offer similar functionality and characteristics, allowing for flexibility in circuit design and component selection.

In conclusion, TL074ID is a versatile quad operational amplifier widely used in electronic circuits for amplification, filtering, and signal conditioning. Its high gain bandwidth product, low input bias current, wide supply voltage range, and other features make it suitable for various applications. While it has a limited number of amplifiers compared to other ICs, TL074ID offers excellent performance and reliability.

Texniki həllərdə TL074ID tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of TL074ID in technical solutions:

  1. Q: What is TL074ID? A: TL074ID is a quad operational amplifier (op-amp) integrated circuit that is commonly used in various electronic applications.

  2. Q: What is the voltage supply range for TL074ID? A: The voltage supply range for TL074ID is typically between ±5V and ±18V.

  3. Q: What is the maximum output current of TL074ID? A: The maximum output current of TL074ID is around 20mA.

  4. Q: Can TL074ID be used as a voltage follower? A: Yes, TL074ID can be used as a voltage follower or buffer amplifier to provide high input impedance and low output impedance.

  5. Q: What is the typical gain bandwidth product of TL074ID? A: The typical gain bandwidth product of TL074ID is around 3 MHz.

  6. Q: Can TL074ID be used in audio applications? A: Yes, TL074ID can be used in audio applications such as audio amplifiers, mixers, and equalizers.

  7. Q: Is TL074ID suitable for low-power applications? A: Yes, TL074ID is suitable for low-power applications as it has a low quiescent current consumption.

  8. Q: Can TL074ID operate in a single-supply configuration? A: Yes, TL074ID can operate in a single-supply configuration by connecting the non-inverting input to a reference voltage.

  9. Q: What is the input offset voltage of TL074ID? A: The input offset voltage of TL074ID is typically around 3 mV.

  10. Q: Can TL074ID be used in high-frequency applications? A: TL074ID is not specifically designed for high-frequency applications, but it can still be used in moderate frequency applications up to a few MHz.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.