Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLC2264CPWR
Ətraflı Baxın Məlumat vərəqləri

TLC2264CPWR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Input/Output, Quad Operational Amplifier
  • Package: TSSOP-14
  • Essence: The TLC2264CPWR is a low-power quad operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: ±1.35V to ±8V
  • Input Offset Voltage: 2mV (maximum)
  • Input Bias Current: 1pA (typical)
  • Gain Bandwidth Product: 2.2MHz (typical)
  • Slew Rate: 1.3V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLC2264CPWR has a TSSOP-14 package with the following pin configuration:

___________ Vcc+| 1 14 |Vcc- In1-| 2 13 |Out1 In1+| 3 12 |Out2 Gnd | 4 11 |Out3 In2-| 5 10 |Out4 In2+| 6 9 |N/C N/C | 7 8 |N/C ‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • Low power consumption: The TLC2264CPWR operates at a low supply voltage and consumes minimal power, making it suitable for battery-powered applications.
  • Rail-to-rail input/output: The operational amplifier supports input and output signals that can swing close to the supply rails, maximizing the dynamic range.
  • Quad operational amplifier: The TLC2264CPWR integrates four independent operational amplifiers in a single package, providing cost and space savings.

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable devices.
  • Rail-to-rail input/output allows for maximum signal swing.
  • Four amplifiers in one package save board space and reduce costs.
  • Wide operating temperature range enables use in various environments.

Disadvantages

  • Limited gain bandwidth product compared to higher-end operational amplifiers.
  • Higher input offset voltage compared to precision operational amplifiers.

Working Principles

The TLC2264CPWR is based on a CMOS technology that allows for low-power operation. It utilizes a differential input stage followed by a gain stage and an output buffer. The rail-to-rail input/output capability is achieved through careful design of the input and output stages.

Detailed Application Field Plans

The TLC2264CPWR is suitable for a wide range of applications, including:

  1. Battery-powered devices: Portable audio players, handheld instruments, and remote sensors benefit from the low power consumption of the TLC2264CPWR.
  2. Sensor signal conditioning: The rail-to-rail input/output capability makes it ideal for amplifying and conditioning sensor signals with varying voltage levels.
  3. Audio amplification: The quad operational amplifier configuration allows for stereo audio amplification in audio systems and headphones.
  4. Industrial control systems: The wide operating temperature range and low power consumption make it suitable for industrial control applications.

Detailed and Complete Alternative Models

  • LM324: Similar quad operational amplifier with a DIP-14 package.
  • MCP6004: Low-power quad operational amplifier with a smaller SOT-23-14 package.
  • TLV2464: Rail-to-rail input/output quad operational amplifier with a SOIC-14 package.

These alternative models offer similar functionality and can be used as substitutes for the TLC2264CPWR in various applications.

Word count: 410 words

Texniki həllərdə TLC2264CPWR tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of TLC2264CPWR in technical solutions:

  1. Q: What is TLC2264CPWR? A: TLC2264CPWR is a quad operational amplifier (op-amp) integrated circuit (IC) manufactured by Texas Instruments.

  2. Q: What is the supply voltage range for TLC2264CPWR? A: The supply voltage range for TLC2264CPWR is typically between 2.7V and 5.5V.

  3. Q: What is the maximum output current of TLC2264CPWR? A: The maximum output current of TLC2264CPWR is typically around 20mA.

  4. Q: Can TLC2264CPWR be used in single-supply applications? A: Yes, TLC2264CPWR can be used in both single-supply and dual-supply applications.

  5. Q: What is the input offset voltage of TLC2264CPWR? A: The input offset voltage of TLC2264CPWR is typically around 1mV.

  6. Q: What is the bandwidth of TLC2264CPWR? A: The bandwidth of TLC2264CPWR is typically around 1MHz.

  7. Q: Can TLC2264CPWR operate at high temperatures? A: Yes, TLC2264CPWR has a wide temperature range and can operate at temperatures up to 125°C.

  8. Q: Is TLC2264CPWR suitable for low-power applications? A: Yes, TLC2264CPWR is designed for low-power consumption and is suitable for battery-powered devices.

  9. Q: Can TLC2264CPWR be used in audio applications? A: Yes, TLC2264CPWR can be used in audio applications such as amplifiers and filters.

  10. Q: What is the package type of TLC2264CPWR? A: TLC2264CPWR is available in a small-sized TSSOP-14 package, which is suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.