Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLE2072ID
Ətraflı Baxın Məlumat vərəqləri

TLE2072ID

Product Overview

Category

TLE2072ID belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for amplification and signal processing applications.

Characteristics

  • High precision and low noise
  • Wide bandwidth
  • Low power consumption
  • High input impedance
  • Rail-to-rail output swing capability

Package

TLE2072ID is available in a dual inline package (DIP) with 8 pins.

Essence

The essence of TLE2072ID lies in its ability to provide accurate and reliable amplification of signals in various electronic systems.

Packaging/Quantity

TLE2072ID is typically sold in reels or tubes, containing a quantity of 50 units per package.

Specifications

  • Supply voltage: ±5V to ±18V
  • Input offset voltage: ±1mV
  • Input bias current: 10nA
  • Gain bandwidth product: 16MHz
  • Slew rate: 13V/µs
  • Output current: 40mA
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

TLE2072ID has a total of 8 pins, which are labeled as follows:

  1. V+ (Positive Power Supply)
  2. IN- (Inverting Input)
  3. IN+ (Non-Inverting Input)
  4. V- (Negative Power Supply)
  5. OUT (Output)
  6. NC (No Connection)
  7. NC (No Connection)
  8. VCC (Supply Voltage Compensation)

Functional Features

  • High gain and accuracy
  • Low distortion and noise
  • Wide dynamic range
  • Stable performance over temperature variations
  • Protection against electrostatic discharge (ESD)

Advantages and Disadvantages

Advantages

  • Excellent signal amplification and processing capabilities
  • Versatile application in various electronic systems
  • Low power consumption
  • Wide operating temperature range

Disadvantages

  • Limited output current capability
  • Relatively high cost compared to some alternative models

Working Principles

TLE2072ID operates based on the principles of operational amplifiers (op-amps). It utilizes differential input stages, gain stages, and output stages to amplify and process input signals accurately.

Detailed Application Field Plans

TLE2072ID finds extensive use in the following applications:

  1. Audio amplifiers
  2. Instrumentation amplifiers
  3. Active filters
  4. Data acquisition systems
  5. Sensor signal conditioning circuits

Detailed and Complete Alternative Models

Some alternative models that can be considered as substitutes for TLE2072ID are:

  1. LM358
  2. TL072
  3. AD822
  4. NE5532
  5. OP275

These models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, TLE2072ID is a highly reliable and versatile integrated circuit used for amplification and signal processing in various electronic systems. Its excellent performance, wide application range, and availability of alternative models make it a popular choice among designers and engineers.

Word count: 437

Texniki həllərdə TLE2072ID tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of TLE2072ID in technical solutions:

  1. Q: What is TLE2072ID? A: TLE2072ID is a dual operational amplifier (op-amp) integrated circuit commonly used in various technical applications.

  2. Q: What is the voltage supply range for TLE2072ID? A: The voltage supply range for TLE2072ID is typically between ±2.5V and ±18V.

  3. Q: What is the input offset voltage of TLE2072ID? A: The input offset voltage of TLE2072ID is typically very low, around 0.5mV.

  4. Q: Can TLE2072ID be used in audio applications? A: Yes, TLE2072ID can be used in audio applications as it has a wide bandwidth and low distortion characteristics.

  5. Q: Is TLE2072ID suitable for precision measurement applications? A: Yes, TLE2072ID is suitable for precision measurement applications due to its low input offset voltage and high gain accuracy.

  6. Q: What is the maximum output current of TLE2072ID? A: The maximum output current of TLE2072ID is typically around 40mA.

  7. Q: Can TLE2072ID operate in a single-supply configuration? A: Yes, TLE2072ID can operate in a single-supply configuration by connecting the negative supply pin to ground.

  8. Q: Does TLE2072ID have built-in protection features? A: Yes, TLE2072ID has built-in protection features such as short-circuit protection and thermal shutdown.

  9. Q: Can TLE2072ID be used in low-power applications? A: Yes, TLE2072ID is suitable for low-power applications as it has a low quiescent current consumption.

  10. Q: What are some typical applications of TLE2072ID? A: Some typical applications of TLE2072ID include audio amplifiers, active filters, precision instrumentation, and sensor signal conditioning.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.