Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLE2141ID
Ətraflı Baxın Məlumat vərəqləri

TLE2141ID

Product Overview

Category

The TLE2141ID belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used as a high-performance, low-power precision amplifier in various electronic circuits.

Characteristics

  • Low offset voltage and drift
  • Low input bias current
  • High open-loop gain
  • Wide bandwidth
  • Low noise

Package

The TLE2141ID is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of the TLE2141ID lies in its ability to provide precise and reliable amplification in electronic systems.

Packaging/Quantity

The TLE2141ID is typically packaged in reels or tubes and is available in varying quantities depending on the supplier.

Specifications

  • Supply Voltage: ±2.5V to ±18V
  • Input Offset Voltage: 300µV max
  • Input Bias Current: 0.1pA max
  • Gain Bandwidth Product: 4MHz
  • Slew Rate: 13V/µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TLE2141ID has a standard pin configuration with the following pins: 1. Non-inverting input (+) 2. Inverting input (-) 3. Output 4. V- 5. Offset Null 6. V+ 7. NC (No Connection) 8. V-

Functional Features

The TLE2141ID offers the following functional features: - Precision amplification - Low power consumption - Stable operation over temperature variations - High common-mode rejection ratio

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Low power consumption
  • Wide operating voltage range
  • Excellent temperature stability

Disadvantages

  • Limited output current capability
  • Higher cost compared to general-purpose op-amps

Working Principles

The TLE2141ID operates based on the principles of differential amplification, providing high gain and accurate signal processing while minimizing errors due to offset voltage and drift.

Detailed Application Field Plans

The TLE2141ID finds applications in various fields including: - Instrumentation and measurement systems - Sensor signal conditioning - Audio amplification - Control systems - Signal processing

Detailed and Complete Alternative Models

Some alternative models to the TLE2141ID include: - LM324 - AD822 - OPA227

In conclusion, the TLE2141ID is a high-performance operational amplifier known for its precision, low power consumption, and wide operating range. It is widely used in diverse electronic applications where accurate signal amplification is essential.

[Word count: 409]

Texniki həllərdə TLE2141ID tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the TLE2141ID?

    • The TLE2141ID is a high-performance, low-power operational amplifier designed for use in precision analog applications.

  2. What are the key features of the TLE2141ID?

    • The TLE2141ID features low offset voltage, low input bias current, and low noise, making it suitable for precision signal conditioning and amplification.

  3. What is the typical supply voltage range for the TLE2141ID?

    • The TLE2141ID typically operates from a single or dual power supply ranging from ±2.5V to ±18V.

  4. What are some common applications for the TLE2141ID?

    • Common applications include active filters, precision integrators, precision instrumentation, and sensor signal conditioning.

  5. What is the input offset voltage of the TLE2141ID?

    • The TLE2141ID has a low input offset voltage of typically 300µV, which is beneficial for precision applications.

  6. What is the input bias current of the TLE2141ID?

    • The TLE2141ID has a low input bias current of typically 10pA, minimizing errors in high-impedance circuits.

  7. What is the bandwidth of the TLE2141ID?

    • The TLE2141ID has a wide bandwidth of typically 10MHz, enabling it to handle high-frequency signals.

  8. Is the TLE2141ID unity-gain stable?

    • Yes, the TLE2141ID is unity-gain stable, allowing for its use in voltage follower and buffer applications.

  9. Does the TLE2141ID have built-in protection features?

    • The TLE2141ID includes built-in electrostatic discharge (ESD) protection, enhancing its reliability in harsh environments.

  10. What are the recommended operating temperature ranges for the TLE2141ID?

    • The TLE2141ID is typically specified for operation over the industrial temperature range of -40°C to 85°C, making it suitable for a wide range of environments.