Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLV171IDBVR
Ətraflı Baxın Məlumat vərəqləri

TLV171IDBVR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low Voltage, Rail-to-Rail Output, Single Supply
  • Package: SOT-23-5
  • Essence: TLV171IDBVR is a low voltage operational amplifier designed for single supply applications.
  • Packaging/Quantity: Available in tape and reel packaging with 3000 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 6V
  • Input Offset Voltage: ±1mV (maximum)
  • Input Bias Current: ±1pA (typical)
  • Gain Bandwidth Product: 3MHz (typical)
  • Slew Rate: 1.6V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLV171IDBVR has a standard SOT-23-5 package with the following pin configuration:

____ V+ | | IN(-) | | IN(+) | | OUT | | GND |____|

Functional Features

  • Low voltage operation allows for use in battery-powered applications.
  • Rail-to-rail output enables maximum dynamic range.
  • Single supply capability simplifies circuit design.
  • Low input bias current minimizes errors in precision applications.
  • Wide operating temperature range ensures reliability in various environments.

Advantages

  • Suitable for low voltage applications where space is limited.
  • High gain bandwidth product allows for accurate signal amplification.
  • Rail-to-rail output provides full swing of signals even at low supply voltages.
  • Low input offset voltage ensures precise signal processing.
  • Excellent temperature stability guarantees consistent performance.

Disadvantages

  • Limited output current capability may not be suitable for driving heavy loads.
  • SOT-23-5 package may require additional precautions for heat dissipation.

Working Principles

The TLV171IDBVR is an operational amplifier that amplifies the difference between its two input terminals. It operates on a single supply voltage and provides a rail-to-rail output swing, meaning it can drive signals close to both supply rails. The low voltage operation and low input bias current make it suitable for battery-powered and precision applications.

Detailed Application Field Plans

  • Battery-powered portable devices
  • Sensor signal conditioning
  • Audio amplification in low voltage systems
  • Signal processing in automotive electronics
  • Industrial control systems

Detailed and Complete Alternative Models

  • TLV1701IDBVR
  • TLV1721IDBVR
  • TLV1731IDBVR
  • TLV1741IDBVR

These alternative models offer similar functionality and performance but may have different specifications or package options.

Word count: 275 words

Texniki həllərdə TLV171IDBVR tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of TLV171IDBVR in technical solutions:

  1. Q: What is TLV171IDBVR? A: TLV171IDBVR is a low-power operational amplifier (op-amp) designed for various applications in electronics.

  2. Q: What is the voltage supply range for TLV171IDBVR? A: The voltage supply range for TLV171IDBVR is typically between 2.7V and 16V.

  3. Q: What is the input offset voltage of TLV171IDBVR? A: The input offset voltage of TLV171IDBVR is typically around 1mV.

  4. Q: Can TLV171IDBVR operate in single-supply configurations? A: Yes, TLV171IDBVR can operate in both single-supply and dual-supply configurations.

  5. Q: What is the typical gain bandwidth product of TLV171IDBVR? A: The typical gain bandwidth product of TLV171IDBVR is around 1MHz.

  6. Q: Is TLV171IDBVR suitable for low-power applications? A: Yes, TLV171IDBVR is designed for low-power applications, making it ideal for battery-powered devices.

  7. Q: Can TLV171IDBVR be used in audio applications? A: Yes, TLV171IDBVR can be used in audio applications such as amplifiers, filters, and audio mixers.

  8. Q: What is the input common-mode voltage range of TLV171IDBVR? A: The input common-mode voltage range of TLV171IDBVR typically extends from the negative supply voltage to within 1.5V of the positive supply voltage.

  9. Q: Does TLV171IDBVR have built-in protection features? A: Yes, TLV171IDBVR has built-in features like short-circuit protection and thermal shutdown to ensure safe operation.

  10. Q: What is the package type for TLV171IDBVR? A: TLV171IDBVR is available in a small SOT-23 package, which is suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.