Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLV2463CD
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-power, Rail-to-Rail Input/Output, Precision
- Package: SOIC (Small Outline Integrated Circuit)
- Essence: TLV2463CD is a precision operational amplifier designed for low-power applications. It offers rail-to-rail input and output capabilities, making it suitable for a wide range of voltage levels.
- Packaging/Quantity: TLV2463CD is available in a standard SOIC package with a quantity of 1 per package.
Specifications
- Supply Voltage: ±2.5 V to ±6 V
- Input Offset Voltage: 500 µV (max)
- Input Bias Current: 1 pA (typ)
- Gain Bandwidth Product: 2.8 MHz (typ)
- Slew Rate: 1.6 V/µs (typ)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2463CD has a total of 8 pins arranged as follows:
___________
OUT | 1 8 | VCC+
IN- | 2 7 | IN+
IN+ | 3 6 | VCC-
GND | 4 5 | OUT
|___________|
Functional Features
- Low-power consumption: TLV2463CD operates at a low supply voltage and consumes minimal power, making it suitable for battery-powered devices.
- Rail-to-rail input/output: The operational amplifier can accept and deliver signals that are close to the supply rails, maximizing the dynamic range.
- Precision performance: With low input offset voltage and bias current, TLV2463CD provides accurate amplification of signals.
- Wide temperature range: The operational amplifier can operate in a wide temperature range, making it suitable for various environmental conditions.
Advantages and Disadvantages
Advantages: - Low-power consumption extends battery life in portable devices. - Rail-to-rail input/output allows for maximum signal swing. - Precision performance ensures accurate amplification. - Wide temperature range enables operation in diverse environments.
Disadvantages: - Limited bandwidth compared to some high-speed operational amplifiers. - Single package option may not suit all application requirements.
Working Principles
TLV2463CD is based on the principles of operational amplifiers. It amplifies the difference between the voltages applied to its inputs, providing a high gain output signal. The rail-to-rail input/output capability allows the amplifier to handle signals that span the entire supply voltage range.
Detailed Application Field Plans
TLV2463CD finds applications in various fields, including but not limited to: 1. Portable audio devices 2. Sensor interfaces 3. Battery-powered instrumentation 4. Signal conditioning circuits 5. Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to TLV2463CD with similar characteristics and functionality include: - LMV321 - MCP6002 - MAX4239
These alternatives can be considered based on specific application requirements and availability.
Word count: 314 words
Texniki həllərdə TLV2463CD tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of TLV2463CD in technical solutions:
Q: What is TLV2463CD? A: TLV2463CD is a low-power, rail-to-rail input/output operational amplifier (op-amp) that is commonly used in various electronic applications.
Q: What is the supply voltage range for TLV2463CD? A: The supply voltage range for TLV2463CD is typically between 2.7V and 6V.
Q: What is the input voltage range of TLV2463CD? A: The input voltage range of TLV2463CD extends from the negative supply voltage (V-) to the positive supply voltage (V+).
Q: Can TLV2463CD operate with a single power supply? A: Yes, TLV2463CD can operate with a single power supply, as it has rail-to-rail input/output capability.
Q: What is the typical gain bandwidth product of TLV2463CD? A: The typical gain bandwidth product of TLV2463CD is around 2 MHz.
Q: Is TLV2463CD suitable for low-power applications? A: Yes, TLV2463CD is designed for low-power applications, consuming very low quiescent current.
Q: Can TLV2463CD drive capacitive loads? A: Yes, TLV2463CD has a high output current capability, allowing it to drive capacitive loads up to a certain limit.
Q: Does TLV2463CD have built-in protection features? A: Yes, TLV2463CD includes built-in features like short-circuit protection and thermal shutdown to ensure safe operation.
Q: What is the temperature range for TLV2463CD? A: TLV2463CD can typically operate within a temperature range of -40°C to 125°C.
Q: What are some common applications of TLV2463CD? A: TLV2463CD is commonly used in audio amplifiers, sensor interfaces, battery-powered systems, and other low-power precision applications.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.