Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLV2464AID
Ətraflı Baxın Məlumat vərəqləri

TLV2464AID

Product Overview

The TLV2464AID is a quad operational amplifier belonging to the TLVx46x family of precision, low-power operational amplifiers. This device is designed for applications that require both high precision and low power consumption. The TLV2464AID is commonly used in audio processing, sensor interfaces, and signal conditioning circuits due to its excellent performance characteristics.

Basic Information

  • Category: Operational Amplifier
  • Use: Audio processing, sensor interfaces, signal conditioning
  • Characteristics: Precision, low power consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: High precision, low power consumption
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: ±1.35 V to ±6 V
  • Input Offset Voltage: 150 µV (maximum)
  • Gain Bandwidth Product: 2.8 MHz
  • Slew Rate: 0.7 V/µs
  • Quiescent Current: 300 µA per channel
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TLV2464AID features a standard quad operational amplifier pinout with the following configuration: 1. OUT1- 2. OUT1+ 3. V- 4. IN1- 5. IN1+ 6. V+ 7. OUT2+ 8. OUT2- 9. NC (No Connection) 10. IN2+ 11. IN2- 12. V- 13. OUT3+ 14. OUT3- 15. V+ 16. IN3+ 17. IN3- 18. V- 19. OUT4+ 20. OUT4-

Functional Features

  • Low input offset voltage
  • Rail-to-rail output swing
  • Low noise
  • Wide supply voltage range
  • MicroPower shutdown mode

Advantages and Disadvantages

Advantages

  • High precision
  • Low power consumption
  • Versatile application range
  • Small form factor package

Disadvantages

  • Limited output current capability
  • Sensitive to electrostatic discharge

Working Principles

The TLV2464AID operates based on the principles of operational amplifiers, providing high gain and differential inputs to amplify small signals with high accuracy. It utilizes low-power circuitry to minimize energy consumption while maintaining precision.

Detailed Application Field Plans

The TLV2464AID is well-suited for various applications including: - Audio signal processing - Sensor interface circuits - Signal conditioning for measurement systems - Portable instrumentation

Detailed and Complete Alternative Models

  • TLV2462AID: Dual operational amplifier with similar characteristics
  • TLV2461AID: Single operational amplifier with comparable specifications
  • TLV2460AID: Single operational amplifier with lower power consumption

In conclusion, the TLV2464AID is a versatile and precise quad operational amplifier suitable for a wide range of applications requiring low power consumption and high precision.

Word Count: 443

Texniki həllərdə TLV2464AID tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the TLV2464AID?

    • The TLV2464AID is a low-power, rail-to-rail input/output operational amplifier with a wide operating voltage range.

  2. What are the key features of the TLV2464AID?

    • The TLV2464AID features low power consumption, rail-to-rail input and output, and a wide supply voltage range, making it suitable for battery-powered applications and other low-power designs.

  3. What are the typical applications of the TLV2464AID?

    • Typical applications include sensor interfaces, battery-powered instrumentation, and signal conditioning circuits.

  4. What is the supply voltage range for the TLV2464AID?

    • The TLV2464AID can operate from a single supply voltage as low as 2.7V and as high as 6V, or a dual supply voltage of ±1.35V to ±3V.

  5. What is the input offset voltage of the TLV2464AID?

    • The input offset voltage is typically 500µV, which is important for precision applications.

  6. What is the input bias current of the TLV2464AID?

    • The input bias current is typically 1pA, which is crucial for maintaining accuracy in high-impedance sensor interfaces.

  7. Does the TLV2464AID have ESD protection?

    • Yes, the TLV2464AID has built-in ESD protection, making it robust in harsh environments.

  8. Can the TLV2464AID drive capacitive loads?

    • Yes, the TLV2464AID is designed to drive capacitive loads, which is useful in filter and ADC applications.

  9. What is the temperature range for the TLV2464AID?

    • The TLV2464AID operates over a wide temperature range from -40°C to 125°C, suitable for industrial and automotive applications.

  10. Is the TLV2464AID available in different package options?

    • Yes, the TLV2464AID is available in various package options, including SOIC, MSOP, and TSSOP, providing flexibility for different PCB layouts and space constraints.