Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLV2464AIDRG4
Ətraflı Baxın Məlumat vərəqləri

TLV2464AIDRG4

Product Overview

Category

The TLV2464AIDRG4 belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used as a general-purpose operational amplifier for various analog applications.

Characteristics

  • Low noise
  • Low input bias current
  • Rail-to-rail output swing
  • Wide bandwidth

Package

The TLV2464AIDRG4 comes in a small-outline integrated circuit (SOIC) package.

Essence

This op-amp is essential for precision analog signal processing and conditioning.

Packaging/Quantity

It is typically available in reels with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: ±1.35 V to ±18 V
  • Input Offset Voltage: 300 µV max
  • Input Bias Current: 10 pA max
  • Gain Bandwidth Product: 2.8 MHz
  • Slew Rate: 2.3 V/µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TLV2464AIDRG4 has a standard pin configuration with four pins, including the non-inverting input (pin 3), inverting input (pin 2), output (pin 1), and power supply pins (pins 4 and 8).

Functional Features

  • Low noise performance for precision applications
  • Rail-to-rail output swing for maximum dynamic range
  • Wide bandwidth for versatile use cases
  • Low input bias current for minimizing errors in sensor interfaces

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Versatile and wide operating range
  • Low power consumption

Disadvantages

  • Limited output current capability
  • Higher cost compared to basic op-amps

Working Principles

The TLV2464AIDRG4 operates based on the principles of differential amplification and feedback control, allowing it to amplify small signals with high accuracy and low distortion.

Detailed Application Field Plans

Precision Instrumentation

The op-amp can be used in precision instrumentation equipment such as digital multimeters and oscilloscopes due to its low noise and high accuracy.

Sensor Interfaces

Its low input bias current makes it suitable for interfacing with various sensors, ensuring minimal error in signal conditioning.

Audio Signal Processing

The rail-to-rail output swing and low distortion make it ideal for audio signal processing applications, such as audio mixers and equalizers.

Detailed and Complete Alternative Models

  • OPA344: Offers similar performance with lower power consumption
  • LMV324: Provides a lower cost alternative with slightly reduced specifications
  • AD8629: Offers higher precision and lower noise performance

In conclusion, the TLV2464AIDRG4 is a versatile operational amplifier with high precision and wide operating range, making it suitable for various analog applications in fields such as instrumentation, sensor interfaces, and audio signal processing.

[Word Count: 398]

Texniki həllərdə TLV2464AIDRG4 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the TLV2464AIDRG4?

    • The TLV2464AIDRG4 is a low-power, rail-to-rail input/output operational amplifier with a wide operating voltage range.

  2. What are the key features of the TLV2464AIDRG4?

    • The TLV2464AIDRG4 features low noise, low offset voltage, low quiescent current, and high output current drive capability.

  3. What are the typical applications for the TLV2464AIDRG4?

    • Typical applications include sensor interfaces, precision instrumentation, data acquisition systems, and audio signal processing.

  4. What is the supply voltage range for the TLV2464AIDRG4?

    • The TLV2464AIDRG4 can operate from a single supply voltage ranging from 2.7V to 16V.

  5. What is the input offset voltage of the TLV2464AIDRG4?

    • The input offset voltage is typically 300µV, making it suitable for precision applications.

  6. What is the input bias current of the TLV2464AIDRG4?

    • The input bias current is typically 1pA, which is beneficial for high-impedance sensor interface applications.

  7. Does the TLV2464AIDRG4 have ESD protection?

    • Yes, the TLV2464AIDRG4 has built-in ESD protection, making it robust in harsh environments.

  8. Can the TLV2464AIDRG4 be used in low-power applications?

    • Yes, the TLV2464AIDRG4 has a low quiescent current of 900µA per channel, making it suitable for battery-powered devices.

  9. What is the temperature range for the TLV2464AIDRG4?

    • The TLV2464AIDRG4 can operate over a wide temperature range from -40°C to 125°C.

  10. Is the TLV2464AIDRG4 available in a small package?

    • Yes, the TLV2464AIDRG4 is available in a small 14-pin VSSOP package, making it suitable for space-constrained designs.