Texas Instruments
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLV2464AIPW
Ətraflı Baxın Məlumat vərəqləri

TLV2464AIPW

Product Overview

The TLV2464AIPW belongs to the category of operational amplifiers (op-amps) and is commonly used in various electronic circuits. This op-amp is known for its high precision, low noise, and low power consumption characteristics. The TLV2464AIPW comes in a small outline package (SOIC) and is available in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage Range: ±1.35 V to ±18 V
  • Input Offset Voltage: ±500 µV (max)
  • Gain Bandwidth Product: 2.8 MHz
  • Slew Rate: 0.6 V/µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TLV2464AIPW has a standard pin configuration with four pins: 1. Pin 1: Output 2. Pin 2: Inverting Input 3. Pin 3: Non-Inverting Input 4. Pin 4: V-

Functional Features

The TLV2464AIPW is designed to provide high accuracy and stability in various applications. It offers low input offset voltage, low noise, and high common-mode rejection ratio, making it suitable for precision instrumentation and sensor conditioning circuits.

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Low noise and low power consumption
  • Wide supply voltage range

Disadvantages

  • Limited bandwidth compared to some other op-amps
  • Slightly higher input offset voltage

Working Principles

The TLV2464AIPW operates based on the principles of differential amplification and feedback control. It amplifies the voltage difference between its two input terminals while maintaining high precision and stability.

Detailed Application Field Plans

The TLV2464AIPW finds extensive use in the following application fields: - Precision measurement instruments - Sensor signal conditioning - Audio processing equipment - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the TLV2464AIPW include: - LM324 - AD822 - OPA227

In conclusion, the TLV2464AIPW is a versatile operational amplifier known for its precision and low noise characteristics, making it suitable for a wide range of applications in the field of electronics.

[Word Count: 305]

Texniki həllərdə TLV2464AIPW tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the TLV2464AIPW?

    • The TLV2464AIPW is a low-power, rail-to-rail input/output operational amplifier with a wide operating voltage range.

  2. What are the key features of TLV2464AIPW?

    • The TLV2464AIPW features low noise, low offset voltage, low quiescent current, and high output current drive capability.

  3. What is the typical application of TLV2464AIPW?

    • The TLV2464AIPW is commonly used in applications such as sensor signal conditioning, precision instrumentation, and active filters.

  4. What is the supply voltage range for TLV2464AIPW?

    • The TLV2464AIPW can operate from a single supply voltage ranging from 2.7V to 16V or dual supply voltage ranging from ±1.35V to ±8V.

  5. What is the input bias current of TLV2464AIPW?

    • The input bias current of TLV2464AIPW is typically 0.5 pA.

  6. What is the maximum output current of TLV2464AIPW?

    • The TLV2464AIPW has a maximum output current of ±40 mA.

  7. What is the temperature range for TLV2464AIPW?

    • The TLV2464AIPW operates over a temperature range of -40°C to 125°C.

  8. Can TLV2464AIPW be used in low-power applications?

    • Yes, TLV2464AIPW is suitable for low-power applications due to its low quiescent current.

  9. Does TLV2464AIPW have ESD protection?

    • Yes, TLV2464AIPW has integrated ESD protection on all pins.

  10. Is TLV2464AIPW available in a small package?

    • Yes, TLV2464AIPW is available in a small MSOP-14 package, making it suitable for space-constrained applications.