Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLV2465ID
Product Overview
- Category: Integrated Circuits (ICs)
- Use: Operational Amplifier
- Characteristics:
- Low power consumption
- Rail-to-rail input and output
- Wide supply voltage range
- High slew rate
- Low noise
- Package: SOIC-8
- Essence: TLV2465ID is a high-performance operational amplifier designed for various applications.
- Packaging/Quantity: The TLV2465ID is typically sold in reels of 2500 units.
Specifications
- Supply Voltage Range: ±1.35 V to ±18 V
- Input Offset Voltage: 500 µV (maximum)
- Input Bias Current: 1 pA (typical)
- Gain Bandwidth Product: 10 MHz (typical)
- Slew Rate: 6 V/µs (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2465ID has the following pin configuration:
___________
OUT | 1 8 | VCC+
IN- | 2 7 | IN+
IN+ | 3 6 | VCC-
GND | 4 5 | OUT
‾‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- Low power consumption allows for extended battery life in portable devices.
- Rail-to-rail input and output capability enables operation at the full supply voltage range.
- Wide supply voltage range makes it suitable for various applications.
- High slew rate ensures fast response to input signals.
- Low noise performance provides accurate signal amplification.
Advantages and Disadvantages
Advantages: - Low power consumption - Rail-to-rail input and output - Wide supply voltage range - High slew rate - Low noise
Disadvantages: - None identified
Working Principles
The TLV2465ID is an operational amplifier that amplifies the difference between its two input terminals. It operates by using a feedback mechanism to adjust the output voltage based on the input signal. The rail-to-rail input and output capability allows for accurate amplification of signals within the full supply voltage range.
Detailed Application Field Plans
The TLV2465ID can be used in various applications, including but not limited to: - Audio amplification - Sensor signal conditioning - Active filters - Data acquisition systems - Portable devices
Detailed and Complete Alternative Models
Some alternative models to TLV2465ID with similar characteristics and functionality include: - LM324 - AD8628 - MCP6004 - OPA2134
These alternatives can be considered based on specific application requirements and availability.
Word count: 275 words
Texniki həllərdə TLV2465ID tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of TLV2465ID in technical solutions:
Q: What is TLV2465ID? A: TLV2465ID is a low-power, rail-to-rail input/output operational amplifier (op-amp) that is commonly used in various electronic applications.
Q: What is the supply voltage range for TLV2465ID? A: The supply voltage range for TLV2465ID is typically between 2.7V and 6V.
Q: What is the input voltage range of TLV2465ID? A: The input voltage range of TLV2465ID extends from the negative supply voltage (V-) to the positive supply voltage (V+).
Q: Can TLV2465ID operate with a single power supply? A: Yes, TLV2465ID can operate with a single power supply, as it has rail-to-rail input and output capabilities.
Q: What is the typical gain bandwidth product (GBW) of TLV2465ID? A: The typical gain bandwidth product of TLV2465ID is around 3 MHz.
Q: Is TLV2465ID suitable for low-power applications? A: Yes, TLV2465ID is designed for low-power applications, making it ideal for battery-powered devices or energy-efficient systems.
Q: Can TLV2465ID be used in precision measurement applications? A: Yes, TLV2465ID offers low offset voltage and low input bias current, making it suitable for precision measurement applications.
Q: Does TLV2465ID have built-in protection features? A: Yes, TLV2465ID includes built-in features like short-circuit protection and thermal shutdown to ensure safe operation.
Q: What is the temperature range for TLV2465ID? A: TLV2465ID can typically operate within a temperature range of -40°C to 125°C.
Q: Can TLV2465ID be used in audio applications? A: Yes, TLV2465ID can be used in audio applications due to its low noise characteristics and rail-to-rail capabilities.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.