TLV2764IPWRG4

Product Overview

• Category: Integrated Circuits (ICs)
• Use: Operational Amplifier
• Characteristics: Low-power, Rail-to-Rail Input/Output, Precision
• Package: TSSOP-14
• Essence: TLV2764IPWRG4 is a low-power operational amplifier designed for precision applications.
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 2.7V to 10V
• Input Offset Voltage: ±1.5mV (maximum)
• Input Bias Current: ±1pA (maximum)
• Gain Bandwidth Product: 2.8MHz (typical)
• Slew Rate: 1.6V/µs (typical)
• Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV2764IPWRG4 has a TSSOP-14 package with the following pin configuration:

```

---

| | --| V- OUT |-- Pin 1: Output --| V+ IN- |-- Pin 2: Non-Inverting Input --| NC IN+ |-- Pin 3: Inverting Input --| NC VCC |-- Pin 4: Positive Supply Voltage --| NC NC |-- Pins 5-7: Not Connected --| NC GND |-- Pin 8: Ground --| NC NC |-- Pins 9-11: Not Connected --| NC NC |-- Pin 12: Not Connected --| NC NC |-- Pin 13: Not Connected --| NC NC |-- Pin 14: Not Connected |___________| ```

Functional Features

• Low-power consumption for battery-powered applications
• Rail-to-rail input and output capability allows for maximum dynamic range
• Precision performance with low offset voltage and bias current
• Wide operating temperature range for versatile applications

Advantages and Disadvantages

Advantages

• Low power consumption extends battery life in portable devices.
• Rail-to-rail input/output enables accurate signal amplification even at the extremes of the supply voltage.
• Precision characteristics ensure accurate and reliable operation.
• Wide operating temperature range allows for use in various environments.

Disadvantages

• Limited number of pins may restrict the number of external components that can be connected directly to the IC.
• Not suitable for high-frequency applications due to limited gain bandwidth product.

Working Principles

The TLV2764IPWRG4 is an operational amplifier that amplifies the difference between its two input voltages. It operates on a single positive supply voltage and provides a rail-to-rail output swing. The internal circuitry ensures low offset voltage, low bias current, and high precision amplification. The amplifier can be used in various applications where accurate signal amplification is required.

Detailed Application Field Plans

The TLV2764IPWRG4 is commonly used in the following application fields:

1. Sensor Signal Conditioning: Amplifying and conditioning signals from sensors such as temperature, pressure, or light sensors.
2. Portable Devices: Battery-powered devices like smartphones, tablets, and portable medical equipment benefit from the low-power consumption and rail-to-rail capabilities of this amplifier.
3. Industrial Control Systems: Precise amplification of control signals in industrial automation systems.
4. Audio Amplification: Accurate amplification of audio signals in audio equipment and musical instruments.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TLV2764IPWRG4 are:

1. LMV321: Low-power, rail-to-rail input/output operational amplifier.
2. MCP6004: Low-power, rail-to-rail input/output op-amp with multiple channels.
3. MAX44267: Precision, low-noise, rail-to-rail input/output operational amplifier.

These alternative models can be considered based on specific application requirements and design constraints.

Word count: 510 words