Torex Semiconductor Ltd
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
XC6124D519ER-G
Ətraflı Baxın Məlumat vərəqləri

XC6124D519ER-G

Product Overview

Category

XC6124D519ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection

Package

XC6124D519ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124D519ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124D519ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • High accuracy voltage regulation
  • Low power consumption
  • Overcurrent protection
  • Short-circuit protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures stable performance of electronic circuits.
  • Low dropout voltage allows for efficient power utilization.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents damage due to excessive heat.

Disadvantages

  • Limited input voltage range (2.5V - 6.0V).
  • Limited output voltage range (1.2V - 5.5V).

Working Principles

XC6124D519ER-G operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain a stable output voltage. It utilizes a feedback mechanism to continuously monitor and regulate the output voltage.

Detailed Application Field Plans

XC6124D519ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D519ER-G are: - LM1117-3.3 - LT1761ES5-3.3 - MCP1700-3302E/TO

These models offer similar functionality and specifications, providing options for different design requirements.

Note: The content provided above is approximately 300 words. Additional information may be added to meet the required word count of 1100 words.

Texniki həllərdə XC6124D519ER-G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of XC6124D519ER-G in technical solutions:

  1. Question: What is XC6124D519ER-G?
    - Answer: XC6124D519ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage exceeds or falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124D519ER-G?
    - Answer: The operating voltage range of XC6124D519ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124D519ER-G detect voltage levels?
    - Answer: XC6124D519ER-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the input voltage crosses this threshold, it triggers the output signal.

  4. Question: What is the output type of XC6124D519ER-G?
    - Answer: XC6124D519ER-G has an open-drain output type, which means it can sink current but cannot source current. This allows for flexibility in connecting external components.

  5. Question: Can XC6124D519ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124D519ER-G can be used in battery-powered applications as it operates within a wide voltage range and has low quiescent current consumption.

  6. Question: What is the typical accuracy of XC6124D519ER-G?
    - Answer: The typical accuracy of XC6124D519ER-G is ±1.5% at room temperature.

  7. Question: Does XC6124D519ER-G have built-in hysteresis?
    - Answer: Yes, XC6124D519ER-G has a built-in hysteresis of typically 0.1V. This helps to prevent output oscillation when the input voltage is near the threshold.

  8. Question: Can XC6124D519ER-G be used in automotive applications?
    - Answer: Yes, XC6124D519ER-G is AEC-Q100 qualified and can be used in automotive applications that require reliable voltage monitoring.

  9. Question: What is the maximum supply current of XC6124D519ER-G?
    - Answer: The maximum supply current of XC6124D519ER-G is typically 1.5µA, making it suitable for low-power applications.

  10. Question: Is XC6124D519ER-G available in different package options?
    - Answer: Yes, XC6124D519ER-G is available in various package options, including SOT-25 and USP-6B, providing flexibility for different PCB layouts and space constraints.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.