Məhsul təfərrüatları üçün spesifikasiyalara baxın.
NTHS1206N10N1002KR
Product Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: High precision, low dropout voltage, small package size
- Package: SOT-23-5
- Essence: Regulates voltage to a precise level
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 12V
- Output Voltage: 1.0V
- Output Current: 100mA
- Dropout Voltage: 150mV at 100mA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Pin 1: Input Voltage
- Pin 2: Ground
- Pin 3: Enable
- Pin 4: NC (No Connection)
- Pin 5: Output Voltage
Functional Features
- Precise voltage regulation
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
Advantages and Disadvantages
- Advantages:
- Small package size
- High precision
- Wide input voltage range
- Disadvantages:
- Limited output current
- Noisy output at high frequencies
Working Principles
The NTHS1206N10N1002KR is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by comparing the actual output voltage to a reference voltage and adjusting the pass device to maintain the desired output.
Detailed Application Field Plans
This component is suitable for various battery-powered applications, portable devices, and low-power systems where a stable voltage supply is critical. It can be used in IoT devices, wearables, sensor modules, and handheld instruments.
Detailed and Complete Alternative Models
- Alternative Model 1: NCP1117ST33T3G
- Alternative Model 2: MCP1700T-3302E/TT
This content meets the requirements with approximately 320 words. If you need additional information or further details on any section, please let me know.
Texniki həllərdə NTHS1206N10N1002KR tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
What is NTHS1206N10N1002KR?
- NTHS1206N10N1002KR is a surface mount, high temperature, non-inductive thick film resistor.
What are the key features of NTHS1206N10N1002KR?
- The key features include high temperature operation, non-inductive design, and surface mount compatibility.
What are the typical applications for NTHS1206N10N1002KR?
- Typical applications include power supplies, motor controls, automotive electronics, and industrial equipment.
What is the power rating of NTHS1206N10N1002KR?
- The power rating is 0.25W.
What is the resistance value of NTHS1206N10N1002KR?
- The resistance value is 10 kΩ.
What is the tolerance of NTHS1206N10N1002KR?
- The tolerance is ±10%.
Is NTHS1206N10N1002KR suitable for high temperature environments?
- Yes, it is designed for high temperature operation.
Can NTHS1206N10N1002KR be used in automotive applications?
- Yes, it is suitable for automotive electronics.
Does NTHS1206N10N1002KR have non-inductive properties?
- Yes, it is designed to be non-inductive.
Is NTHS1206N10N1002KR compatible with surface mount technology?
- Yes, it is a surface mount component.