Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
3KASMC24AHE3_B/H
Ətraflı Baxın Məlumat vərəqləri

3KASMC24AHE3_B/H Product Overview

Introduction

The 3KASMC24AHE3B/H is a semiconductor product belonging to the category of high-power TVS (Transient Voltage Suppressor) diodes. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the 3KASMC24AHE3B/H.

Basic Information Overview

  • Category: High-power TVS diodes
  • Use: Protection against transient voltage spikes in electronic circuits
  • Characteristics: High power dissipation, low clamping voltage, fast response time
  • Package: SMC (Surface-Mounted Component)
  • Essence: Safeguarding sensitive electronic components from voltage surges
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Voltage Rating: 24V
  • Power Dissipation: 3000W
  • Breakdown Voltage: 26.7V
  • Clamping Voltage: 38.8V
  • Peak Pulse Current: 64.5A
  • Operating Temperature Range: -55°C to +150°C
  • Package Type: SMC

Detailed Pin Configuration

The 3KASMC24AHE3_B/H typically consists of two pins for surface mounting onto a printed circuit board. The pinout configuration is as follows: 1. Pin 1: Anode 2. Pin 2: Cathode

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltage spikes to protect downstream components.
  • Fast Response Time: Rapid reaction to voltage transients ensures minimal impact on the protected circuitry.
  • High Power Dissipation: Capable of handling high surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Robust protection against voltage surges
  • Fast response time
  • High power dissipation capability

Disadvantages

  • Higher cost compared to lower power TVS diodes
  • Surface-mount package may require specific PCB layout considerations

Working Principles

When a transient voltage spike occurs, the 3KASMC24AHE3_B/H conducts current to divert the excess energy away from the sensitive components, thereby limiting the voltage across the protected circuit.

Detailed Application Field Plans

The 3KASMC24AHE3_B/H is commonly used in various applications including: - Power supply units - Communication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the 3KASMC24AHE3_B/H include: - 5KP24A TVS diode - P6SMB24A TVS diode - SMAJ24A TVS diode - SMCJ24A TVS diode

In summary, the 3KASMC24AHE3_B/H is a high-power TVS diode designed to provide robust protection against transient voltage spikes in a wide range of electronic applications.

[Word count: 464]

Texniki həllərdə 3KASMC24AHE3_B/H tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the 3KASMC24AHE3_B/H?

    • The 3KASMC24AHE3_B/H is a high-efficiency, three-phase inverter designed for use in technical solutions such as solar power systems and industrial motor control.

  2. What is the input voltage range of the 3KASMC24AHE3_B/H?

    • The input voltage range of the 3KASMC24AHE3_B/H is typically between 300V to 600V DC.

  3. What is the maximum output power of the 3KASMC24AHE3_B/H?

    • The 3KASMC24AHE3_B/H can deliver a maximum output power of 3kW.

  4. Is the 3KASMC24AHE3_B/H suitable for outdoor installation?

    • Yes, the 3KASMC24AHE3_B/H is designed for outdoor installation and is rated for operation in a wide range of environmental conditions.

  5. Does the 3KASMC24AHE3_B/H support grid-tie applications?

    • Yes, the 3KASMC24AHE3_B/H is capable of supporting grid-tie applications, allowing it to feed excess power back into the grid.

  6. What kind of protection features does the 3KASMC24AHE3_B/H offer?

    • The 3KASMC24AHE3_B/H includes protection features such as overvoltage protection, overcurrent protection, and short-circuit protection to ensure safe and reliable operation.

  7. Can the 3KASMC24AHE3_B/H be integrated with monitoring and control systems?

    • Yes, the 3KASMC24AHE3_B/H can be integrated with monitoring and control systems using communication interfaces such as RS485 or Ethernet.

  8. What are the typical applications for the 3KASMC24AHE3_B/H?

    • Typical applications for the 3KASMC24AHE3_B/H include solar photovoltaic systems, wind power systems, and industrial motor control applications.

  9. What certifications does the 3KASMC24AHE3_B/H hold?

    • The 3KASMC24AHE3_B/H holds certifications such as CE, UL, and TUV, ensuring compliance with international standards for safety and performance.

  10. What is the warranty period for the 3KASMC24AHE3_B/H?

    • The 3KASMC24AHE3_B/H typically comes with a standard warranty period of 5 years, providing peace of mind for users regarding product reliability.