Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
B130-M3/5AT
Ətraflı Baxın Məlumat vərəqləri

B130-M3/5AT Product Overview

Introduction

The B130-M3/5AT is a crucial component in the field of electronic devices, specifically within the category of semiconductor diodes. This product serves a vital role in various applications due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Semiconductor Diode
  • Use: Rectification and signal demodulation
  • Characteristics: Small form factor, high efficiency, low forward voltage drop
  • Package: SOD-123FL
  • Essence: Silicon-based semiconductor diode
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Maximum Forward Voltage: 0.7V
  • Maximum Reverse Voltage: 30V
  • Maximum Continuous Current: 1A
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The B130-M3/5AT follows the standard pin configuration for SOD-123FL packages, with the anode connected to pin 1 and the cathode connected to pin 2.

Functional Features

  • Efficient rectification of AC signals
  • Low forward voltage drop minimizes power loss
  • Compact size suitable for miniaturized designs

Advantages

  • High efficiency in signal demodulation
  • Small form factor enables space-saving designs
  • Low forward voltage drop reduces power dissipation

Disadvantages

  • Limited maximum reverse voltage compared to some alternatives
  • Relatively lower maximum continuous current handling capacity

Working Principles

The B130-M3/5AT operates based on the principles of semiconductor diode behavior, allowing current flow in one direction while blocking it in the opposite direction. This property makes it ideal for rectification and signal demodulation applications.

Detailed Application Field Plans

The B130-M3/5AT finds extensive use in various electronic devices, including: - Power supplies - Consumer electronics - Communication equipment - Automotive electronics

Detailed and Complete Alternative Models

  • B140-M3/5AT: Higher maximum reverse voltage (40V)
  • B120-M3/5AT: Lower maximum forward voltage (0.5V)
  • B110-M3/5AT: Higher maximum continuous current (1.5A)

In conclusion, the B130-M3/5AT semiconductor diode plays a pivotal role in electronic devices, offering efficient rectification and signal demodulation capabilities. Its compact size and high efficiency make it a preferred choice for various applications, despite some limitations in maximum reverse voltage and continuous current handling. Understanding its working principles and alternative models provides valuable insights for its effective utilization in diverse electronic designs.

Word Count: 366

Texniki həllərdə B130-M3/5AT tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure, here are 10 common questions and answers related to the application of B130-M3/5AT in technical solutions:

  1. What is the B130-M3/5AT?

    • The B130-M3/5AT is a specific model of industrial sensor designed for measuring temperature and pressure in technical applications.

  2. What are the key features of the B130-M3/5AT?

    • The key features include high accuracy temperature and pressure measurements, rugged construction for industrial environments, and compatibility with various communication protocols.

  3. How is the B130-M3/5AT installed and calibrated?

    • The sensor is typically installed using standard mounting methods and can be calibrated using the provided calibration procedures and tools.

  4. What are the typical applications for the B130-M3/5AT?

    • Common applications include monitoring and controlling temperature and pressure in industrial processes, HVAC systems, and automotive testing.

  5. What communication protocols does the B130-M3/5AT support?

    • The sensor supports commonly used protocols such as Modbus, Profibus, and HART, making it compatible with a wide range of control systems.

  6. Can the B130-M3/5AT withstand harsh environmental conditions?

    • Yes, the sensor is designed to withstand harsh conditions including extreme temperatures, high humidity, and exposure to dust and vibrations.

  7. What is the operating temperature range of the B130-M3/5AT?

    • The sensor can operate within a wide temperature range, typically from -40°C to 125°C, making it suitable for diverse industrial environments.

  8. Is the B130-M3/5AT suitable for use in hazardous areas?

    • Yes, the sensor is available in intrinsically safe versions and is suitable for use in hazardous areas where explosive atmospheres may be present.

  9. What kind of maintenance is required for the B130-M3/5AT?

    • The sensor generally requires minimal maintenance, but periodic checks for calibration and cleaning may be necessary depending on the application.

  10. Can the B130-M3/5AT be integrated with existing control systems?

    • Yes, the sensor is designed for easy integration with existing control systems and can provide seamless data exchange for monitoring and control purposes.