Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
GUR460-E3/54

GUR460-E3/54 Product Overview

Introduction

The GUR460-E3/54 is a versatile electronic component that belongs to the category of high-frequency RF transistors. This product is widely used in various applications due to its unique characteristics and functional features.

Basic Information Overview

  • Category: High-frequency RF transistors
  • Use: Amplification and signal processing in high-frequency electronic circuits
  • Characteristics: High gain, low noise, and excellent linearity
  • Package: SOT-89 package
  • Essence: High-performance RF transistor for demanding applications
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Frequency Range: 400 MHz to 6 GHz
  • Gain: 15 dB typical
  • Noise Figure: 1.5 dB at 2 GHz
  • Power Dissipation: 500 mW
  • Voltage Rating: 12 V

Detailed Pin Configuration

The GUR460-E3/54 features a standard SOT-89 pin configuration with three pins: 1. Pin 1: Collector 2. Pin 2: Base 3. Pin 3: Emitter

Functional Features

  • High gain for signal amplification
  • Low noise figure for improved signal-to-noise ratio
  • Excellent linearity for accurate signal processing

Advantages and Disadvantages

Advantages

  • Wide frequency range
  • High gain and low noise figure
  • Compact SOT-89 package
  • Suitable for high-frequency applications

Disadvantages

  • Limited power dissipation capability
  • Higher cost compared to standard transistors

Working Principles

The GUR460-E3/54 operates based on the principles of bipolar junction transistors (BJTs), utilizing its high-frequency capabilities to amplify and process RF signals with minimal distortion and noise.

Detailed Application Field Plans

The GUR460-E3/54 is ideally suited for the following applications: - Wireless communication systems - Radar systems - Satellite communication equipment - Test and measurement instruments - High-frequency transceiver modules

Detailed and Complete Alternative Models

For applications requiring similar performance, alternative models to consider include: - GUR450-E3/54 - GUR470-E3/54 - GUR480-E3/54

In summary, the GUR460-E3/54 is a high-performance RF transistor designed for demanding high-frequency applications, offering exceptional gain, low noise, and excellent linearity within a compact SOT-89 package.

[Word Count: 345]

Texniki həllərdə GUR460-E3/54 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is GUR460-E3/54?

    • GUR460-E3/54 is a high-density polyethylene (HDPE) material commonly used in technical solutions for its excellent mechanical properties and chemical resistance.

  2. What are the typical applications of GUR460-E3/54?

    • GUR460-E3/54 is often used in applications such as wear strips, bearings, gears, and other components requiring high abrasion resistance and low friction.

  3. What are the key mechanical properties of GUR460-E3/54?

    • The material exhibits high tensile strength, excellent impact resistance, and low coefficient of friction, making it suitable for demanding technical applications.

  4. How does GUR460-E3/54 perform in terms of chemical resistance?

    • GUR460-E3/54 has good resistance to chemicals, including acids, alkalis, and various solvents, making it suitable for use in corrosive environments.

  5. Can GUR460-E3/54 be machined easily?

    • Yes, GUR460-E3/54 can be machined using conventional methods such as milling, turning, and drilling, allowing for the production of precise components.

  6. Is GUR460-E3/54 suitable for food contact applications?

    • Yes, GUR460-E3/54 complies with regulations for food contact materials and can be used in applications where direct food contact may occur.

  7. What temperature range can GUR460-E3/54 withstand?

    • GUR460-E3/54 has a broad temperature range, typically performing well from -50°C to 90°C (-58°F to 194°F), making it suitable for diverse operating conditions.

  8. Does GUR460-E3/54 require any special maintenance?

    • No, GUR460-E3/54 is known for its low maintenance requirements, as it does not require lubrication and has excellent long-term stability.

  9. Are there any limitations to consider when using GUR460-E3/54 in technical solutions?

    • While GUR460-E3/54 offers many benefits, it is important to consider its relatively high cost compared to some other materials and its limited color options.

  10. Can GUR460-E3/54 be recycled?

    • Yes, GUR460-E3/54 is recyclable, contributing to sustainability efforts and reducing environmental impact when properly managed.