MBR1035-4HE3/45

Introduction

The MBR1035-4HE3/45 is a diode rectifier belonging to the category of power semiconductor devices. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

Category: Power Semiconductor Device
Use: Rectification of alternating current (AC) to direct current (DC)
Characteristics: High efficiency, low forward voltage drop, fast switching speed
Package: TO-220AB
Essence: Schottky Barrier Rectifier
Packaging/Quantity: Tape & Reel, 800 units per reel

Specifications

Voltage Rating: 35V
Current Rating: 10A
Forward Voltage Drop: 0.55V at 5A
Reverse Leakage Current: 50µA at 25°C
Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBR1035-4HE3/45 has a standard TO-220AB package with three pins: 1. Anode 2. Cathode 3. Thermal Pad

Functional Features

Low forward voltage drop for reduced power dissipation
Fast switching speed for high-frequency applications
High efficiency for energy-saving designs

Advantages and Disadvantages

Advantages

High efficiency
Low forward voltage drop
Fast switching speed

Disadvantages

Higher cost compared to standard rectifiers
Sensitive to overvoltage conditions

Working Principles

The MBR1035-4HE3/45 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The MBR1035-4HE3/45 is suitable for various applications including: - Switching power supplies - DC-DC converters - Solar panel bypass diodes - Battery charging circuits

Detailed and Complete Alternative Models

Some alternative models to the MBR1035-4HE3/45 include: - MBR1045-4HE3/45 - MBR1060-4HE3/45 - MBR20100CT

In conclusion, the MBR1035-4HE3/45 is a high-performance Schottky barrier rectifier with excellent efficiency and fast switching characteristics, making it suitable for a wide range of power electronics applications.

[Word Count: 314]

Texniki həllərdə MBR1035-4HE3/45 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

What is MBR1035-4HE3/45?
- MBR1035-4HE3/45 is a Schottky diode rectifier designed for high efficiency and low power loss in applications such as switch mode power supplies and freewheeling diodes.
What are the key features of MBR1035-4HE3/45?
- The key features include a low forward voltage drop, high current capability, high surge capacity, and a guard ring for enhanced ruggedness and reliability.
What are the typical applications of MBR1035-4HE3/45?
- Typical applications include DC/DC converters, polarity protection, freewheeling diodes, OR-ing diodes, and reverse battery protection.
What is the maximum forward voltage of MBR1035-4HE3/45?
- The maximum forward voltage at 10A is typically 0.55V.
What is the maximum reverse voltage of MBR1035-4HE3/45?
- The maximum reverse voltage is 35V.
What is the operating temperature range of MBR1035-4HE3/45?
- The operating temperature range is typically -65°C to +175°C.
What is the package type of MBR1035-4HE3/45?
- It comes in a TO-220AB package.
What are the recommended mounting techniques for MBR1035-4HE3/45?
- Recommended mounting techniques include using a thermal interface material and ensuring proper heat sinking for efficient thermal management.
What are the potential failure modes of MBR1035-4HE3/45?
- Potential failure modes may include excessive forward voltage, reverse leakage current, and thermal runaway under high temperature conditions.
Where can I find detailed specifications and application notes for MBR1035-4HE3/45?
- Detailed specifications and application notes can be found in the product datasheet provided by the manufacturer or distributor.