Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MBR10H35HE3/45
Ətraflı Baxın Məlumat vərəqləri

MBR10H35HE3/45

Product Overview

Category

The MBR10H35HE3/45 belongs to the category of Schottky diodes.

Use

It is commonly used in power supply and rectification applications.

Characteristics

  • High efficiency
  • Low forward voltage drop
  • Fast switching speed
  • Low reverse leakage current

Package

The MBR10H35HE3/45 is typically available in a TO-220AB package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) with minimal power loss.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Average Forward Current: 10A
  • Reverse Voltage: 35V
  • Forward Voltage Drop: 0.55V at 5A
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The MBR10H35HE3/45 has three pins: 1. Anode 2. Cathode 3. Thermal pad (connected to the metal tab of the TO-220AB package)

Functional Features

  • High current capability
  • Low power dissipation
  • Excellent thermal management

Advantages

  • Reduced power loss
  • Enhanced system efficiency
  • Compact design due to TO-220AB package

Disadvantages

  • Sensitive to overvoltage conditions
  • Higher cost compared to standard rectifier diodes

Working Principles

The MBR10H35HE3/45 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The MBR10H35HE3/45 is widely used in: - Switching power supplies - DC-DC converters - Solar panel bypass diodes - Rectification circuits in automotive electronics

Detailed and Complete Alternative Models

  • MBR10H35CTG
  • MBR10H35FCTG
  • MBR10H35FCTG
  • MBR10H35FCTG
  • MBR10H35FCTG

In conclusion, the MBR10H35HE3/45 Schottky diode offers high efficiency and fast switching characteristics, making it suitable for various power supply and rectification applications. Its compact TO-220AB package and low forward voltage drop make it an attractive choice for designers seeking to optimize system performance while minimizing power losses.

[Word count: 399]

Texniki həllərdə MBR10H35HE3/45 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the MBR10H35HE3/45 diode used for?

    • The MBR10H35HE3/45 diode is commonly used in rectification and power management applications due to its high efficiency and low forward voltage drop.

  2. What are the key features of the MBR10H35HE3/45 diode?

    • The MBR10H35HE3/45 diode features a low forward voltage, high current capability, fast switching speed, and high temperature operation, making it suitable for demanding technical solutions.

  3. How does the MBR10H35HE3/45 diode compare to other diodes in its class?

    • Compared to other diodes, the MBR10H35HE3/45 offers lower forward voltage drop, higher current handling capacity, and better thermal performance, making it a preferred choice for many technical solutions.

  4. What are the typical applications of the MBR10H35HE3/45 diode?

    • The MBR10H35HE3/45 diode is commonly used in power supplies, battery chargers, DC-DC converters, and motor control circuits due to its high efficiency and fast switching characteristics.

  5. What is the maximum operating temperature of the MBR10H35HE3/45 diode?

    • The MBR10H35HE3/45 diode is designed to operate at temperatures up to 175°C, making it suitable for high temperature environments and demanding technical solutions.

  6. Does the MBR10H35HE3/45 diode require a heatsink for certain applications?

    • Depending on the application and power dissipation, a heatsink may be recommended to ensure optimal thermal performance and reliability of the MBR10H35HE3/45 diode in technical solutions.

  7. Can the MBR10H35HE3/45 diode be used in parallel to increase current handling capacity?

    • Yes, the MBR10H35HE3/45 diode can be used in parallel to increase current handling capacity in high-power applications, provided that proper thermal management and current sharing are implemented.

  8. What are the packaging options available for the MBR10H35HE3/45 diode?

    • The MBR10H35HE3/45 diode is available in a variety of surface mount and through-hole packages, including TO-220, DPAK, and D2PAK, offering flexibility for different technical solutions.

  9. Are there any specific layout considerations when using the MBR10H35HE3/45 diode in a circuit?

    • It is important to minimize the length of high-current traces, provide adequate thermal relief, and follow recommended PCB layout guidelines to optimize the performance of the MBR10H35HE3/45 diode in technical solutions.

  10. Where can I find detailed specifications and application notes for the MBR10H35HE3/45 diode?

    • Detailed specifications, application notes, and design resources for the MBR10H35HE3/45 diode can be found on the manufacturer's website or in the product datasheet, providing valuable information for integrating the diode into technical solutions.