Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
SE40PJHM3_A/H
Ətraflı Baxın Məlumat vərəqləri

SE40PJHM3_A/H

Product Overview

Category

The SE40PJHM3_A/H belongs to the category of semiconductor devices.

Use

It is used as a power transistor in electronic circuits.

Characteristics

  • High voltage capability
  • Low collector-emitter saturation voltage
  • Fast switching speed

Package

The SE40PJHM3_A/H is available in a TO-220AB package.

Essence

This product is essential for power control and amplification in various electronic applications.

Packaging/Quantity

The SE40PJHM3_A/H is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Emitter Voltage (Vce): 400V
  • Collector Current (Ic): 6A
  • Power Dissipation (Pd): 40W
  • Transition Frequency (ft): 4MHz
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

  1. Base (B)
  2. Emitter (E)
  3. Collector (C)

Functional Features

  • High voltage capability allows for use in various power applications.
  • Low collector-emitter saturation voltage minimizes power loss during operation.
  • Fast switching speed enables efficient performance in switching circuits.

Advantages

  • Suitable for high voltage applications
  • Low power dissipation
  • Fast switching speed

Disadvantages

  • Limited current handling capacity compared to some alternative models
  • Higher cost compared to standard transistors

Working Principles

The SE40PJHM3_A/H operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its terminals to amplify or switch electronic signals.

Detailed Application Field Plans

The SE40PJHM3_A/H is commonly used in: - Switching power supplies - Motor control circuits - Electronic ballasts - Audio amplifiers

Detailed and Complete Alternative Models

Some alternative models to the SE40PJHM3_A/H include: - MJL4281A - MJE13009 - 2N3055

In conclusion, the SE40PJHM3_A/H is a versatile power transistor with high voltage capability, fast switching speed, and low collector-emitter saturation voltage. Its application spans across various electronic circuits, making it an essential component in power control and amplification.

[Word Count: 310]

Texniki həllərdə SE40PJHM3_A/H tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the SE40PJHM3_A/H used for in technical solutions?

    • The SE40PJHM3_A/H is a high-performance sensor module commonly used for motion detection and presence sensing in various technical solutions.

  2. How does the SE40PJHM3_A/H detect motion?

    • The SE40PJHM3_A/H utilizes passive infrared (PIR) technology to detect changes in infrared radiation within its field of view, thus detecting motion.

  3. What is the operating voltage range of the SE40PJHM3_A/H?

    • The SE40PJHM3_A/H typically operates within a voltage range of 3.3V to 5V, making it compatible with a wide range of electronic systems.

  4. Can the SE40PJHM3_A/H be used outdoors?

    • Yes, the SE40PJHM3_A/H is designed for both indoor and outdoor use, provided it is installed in a suitable weatherproof enclosure.

  5. What is the detection range of the SE40PJHM3_A/H?

    • The SE40PJHM3_A/H has a typical detection range of up to 12 meters, making it suitable for applications requiring long-range motion detection.

  6. Does the SE40PJHM3_A/H have adjustable sensitivity?

    • Yes, the SE40PJHM3_A/H often features adjustable sensitivity settings, allowing users to customize its response to motion.

  7. Is the SE40PJHM3_A/H compatible with microcontrollers such as Arduino or Raspberry Pi?

    • Yes, the SE40PJHM3_A/H can be easily interfaced with popular microcontrollers using its digital output signals.

  8. What is the power consumption of the SE40PJHM3_A/H during operation?

    • The SE40PJHM3_A/H typically consumes low power, with an average current draw of around 1-2mA during operation.

  9. Can the SE40PJHM3_A/H distinguish between different types of motion?

    • The SE40PJHM3_A/H is primarily designed to detect general motion and presence, rather than specific types of motion.

  10. Are there any special considerations for installing the SE40PJHM3_A/H in technical solutions?

    • It is important to ensure that the SE40PJHM3_A/H is mounted at an appropriate height and angle to effectively cover the desired detection area, and to minimize false triggers from environmental factors.