Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
SS10PH9HM3_A/I
Ətraflı Baxın Məlumat vərəqləri

SS10PH9HM3_A/I

Product Overview

Category: Semiconductor
Use: Power rectifier
Characteristics: High efficiency, fast switching, low forward voltage drop
Package: TO-220AB
Essence: High power density
Packaging/Quantity: Tape and reel, 500 units per reel

Specifications

  • Maximum Average Forward Current: 10A
  • Reverse Voltage: 100V
  • Forward Voltage Drop: 0.75V at 5A
  • Reverse Recovery Time: 35ns

Detailed Pin Configuration

  1. Anode
  2. Cathode
  3. Not connected

Functional Features

  • Fast switching for high efficiency
  • Low forward voltage drop for reduced power dissipation
  • High power density for compact designs

Advantages and Disadvantages

Advantages: - High efficiency - Fast switching - Low forward voltage drop

Disadvantages: - Higher cost compared to standard rectifiers - Sensitive to overvoltage conditions

Working Principles

The SS10PH9HM3_A/I is a power rectifier designed to efficiently convert alternating current (AC) to direct current (DC) by allowing current to flow in only one direction. Its fast switching and low forward voltage drop characteristics make it suitable for high-frequency applications where energy efficiency is crucial.

Detailed Application Field Plans

The SS10PH9HM3_A/I is ideal for use in: - Switching power supplies - LED lighting - Motor drives - Solar inverters

Detailed and Complete Alternative Models

  1. SS15PH9HM3_A/I - 15A, 100V power rectifier
  2. SS20PH9HM3_A/I - 20A, 100V power rectifier
  3. SS10PH11HM3_A/I - 10A, 110V power rectifier

This comprehensive entry provides detailed information about the SS10PH9HM3_A/I power rectifier, including its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Texniki həllərdə SS10PH9HM3_A/I tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is SS10PH9HM3_A/I?

    • SS10PH9HM3_A/I is a high-performance semiconductor component designed for use in technical solutions, such as power management and control systems.

  2. What are the key features of SS10PH9HM3_A/I?

    • The key features of SS10PH9HM3_A/I include high voltage capability, low on-resistance, fast switching speed, and thermal performance.

  3. In what technical solutions can SS10PH9HM3_A/I be used?

    • SS10PH9HM3_A/I can be used in various technical solutions such as motor control, power supplies, lighting systems, and battery management.

  4. What are the benefits of using SS10PH9HM3_A/I in technical solutions?

    • The benefits of using SS10PH9HM3_A/I include improved energy efficiency, reduced heat dissipation, and enhanced system reliability.

  5. What is the operating temperature range of SS10PH9HM3_A/I?

    • The operating temperature range of SS10PH9HM3_A/I is typically between -55°C to 175°C, making it suitable for a wide range of environments.

  6. How does SS10PH9HM3_A/I contribute to power management in technical solutions?

    • SS10PH9HM3_A/I contributes to power management by minimizing power losses, optimizing voltage regulation, and improving overall system performance.

  7. Can SS10PH9HM3_A/I be used in automotive applications?

    • Yes, SS10PH9HM3_A/I is suitable for automotive applications such as electric vehicle powertrains, battery management systems, and LED lighting.

  8. What are the recommended circuit configurations for integrating SS10PH9HM3_A/I into technical solutions?

    • Common circuit configurations for SS10PH9HM3_A/I include buck converters, synchronous rectifiers, and motor drive circuits.

  9. Are there any specific design considerations when using SS10PH9HM3_A/I in technical solutions?

    • Design considerations for SS10PH9HM3_A/I include proper thermal management, gate drive optimization, and protection against overcurrent and overvoltage conditions.

  10. Where can I find detailed application notes and reference designs for SS10PH9HM3_A/I?

    • Detailed application notes and reference designs for SS10PH9HM3_A/I can be found on the manufacturer's website or through their technical support resources.