SS12P3L-M3/87A

Product Overview

Category: Semiconductor
Use: Rectifier diode
Characteristics: High efficiency, low forward voltage drop, fast switching
Package: SOD-123FL
Essence: Efficient rectification of AC to DC
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

Voltage Rating: 120V
Current Rating: 1A
Forward Voltage Drop: 0.7V
Reverse Recovery Time: 35ns
Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The SS12P3L-M3/87A has a standard SOD-123FL package with the following pin configuration: - Pin 1: Anode - Pin 2: Cathode - Pin 3: Not connected (NC)

Functional Features

Efficient rectification of alternating current (AC) to direct current (DC)
Fast switching capability for high-frequency applications
Low forward voltage drop minimizes power loss

Advantages and Disadvantages

Advantages

High efficiency
Low forward voltage drop
Fast switching speed

Disadvantages

Limited reverse voltage rating
Sensitivity to overvoltage conditions

Working Principles

The SS12P3L-M3/87A operates based on the principle of semiconductor rectification. When a positive voltage is applied to the anode with respect to the cathode, the diode conducts, allowing current to flow in the forward direction. In the reverse bias condition, the diode blocks the current flow.

Detailed Application Field Plans

The SS12P3L-M3/87A is suitable for various applications including: - Switching power supplies - LED lighting - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the SS12P3L-M3/87A include: - 1N4148 - 1N4001 - 1N5819 - BAT54S

This comprehensive entry provides detailed information about the SS12P3L-M3/87A rectifier diode, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Texniki həllərdə SS12P3L-M3/87A tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

What is the SS12P3L-M3/87A?
- The SS12P3L-M3/87A is a Schottky diode designed for general purpose, low voltage applications.
What are the key features of the SS12P3L-M3/87A?
- The key features include a low forward voltage drop, high current capability, and fast switching speed.
What are the typical applications of the SS12P3L-M3/87A?
- Typical applications include polarity protection, freewheeling diodes, and low voltage rectification in various electronic circuits.
What is the maximum forward voltage of the SS12P3L-M3/87A?
- The maximum forward voltage is typically around 0.45V at a forward current of 1A.
What is the maximum reverse voltage of the SS12P3L-M3/87A?
- The maximum reverse voltage is 30V.
What is the operating temperature range of the SS12P3L-M3/87A?
- The operating temperature range is usually -65°C to +125°C.
Can the SS12P3L-M3/87A be used in high frequency applications?
- Yes, it can be used in high frequency applications due to its fast switching speed.
Does the SS12P3L-M3/87A require a heat sink for certain applications?
- In most cases, the SS12P3L-M3/87A does not require a heat sink due to its low forward voltage drop and high current capability.
Is the SS12P3L-M3/87A RoHS compliant?
- Yes, the SS12P3L-M3/87A is RoHS compliant, making it suitable for use in environmentally sensitive applications.
Are there any recommended layout considerations when using the SS12P3L-M3/87A in a circuit?
- It is recommended to minimize the length of the traces connecting the diode to other components and to provide adequate thermal relief for efficient heat dissipation.

These questions and answers should provide a good overview of the SS12P3L-M3/87A and its application in technical solutions.