Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
SS3P6-M3/85A
Ətraflı Baxın Məlumat vərəqləri

SS3P6-M3/85A

Product Overview

Category

The SS3P6-M3/85A belongs to the category of semiconductor devices.

Use

It is used as a Schottky diode for rectification and voltage clamping applications.

Characteristics

  • Low forward voltage drop
  • High current capability
  • Fast switching speed
  • Low reverse leakage current

Package

The SS3P6-M3/85A is typically available in a surface mount SMB package.

Essence

This product serves as a crucial component in electronic circuits for efficient power management and signal processing.

Packaging/Quantity

It is commonly packaged in reels with quantities varying based on manufacturer specifications.

Specifications

  • Forward Voltage: 0.36V
  • Reverse Voltage: 60V
  • Forward Current: 3A
  • Reverse Leakage Current: 5µA
  • Operating Temperature Range: -65°C to 150°C

Detailed Pin Configuration

The SS3P6-M3/85A typically has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.

Functional Features

  • Efficient rectification of AC to DC
  • Voltage clamping to protect sensitive components
  • Fast response time for rapid switching applications

Advantages

  • Low forward voltage drop reduces power dissipation
  • High current capability allows for handling larger loads
  • Fast switching speed enables high-frequency operation

Disadvantages

  • Limited reverse voltage tolerance compared to other diode types
  • Susceptible to thermal runaway at high currents and temperatures

Working Principles

The SS3P6-M3/85A operates based on the Schottky barrier principle, where the metal-semiconductor junction provides low forward voltage drop and fast switching characteristics.

Detailed Application Field Plans

  • Power supply units
  • Voltage clamping circuits
  • Switching power converters
  • Signal demodulation circuits

Detailed and Complete Alternative Models

  • SS34
  • SS56
  • SS110

In conclusion, the SS3P6-M3/85A is a versatile semiconductor device with efficient rectification and voltage clamping capabilities, making it suitable for various electronic applications. Its low forward voltage drop and high current capability are advantageous, although it has limitations in reverse voltage tolerance and thermal performance. When considering alternatives, models such as SS34, SS56, and SS110 can be explored based on specific application requirements.

Word count: 314

Texniki həllərdə SS3P6-M3/85A tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is SS3P6-M3/85A?

    • SS3P6-M3/85A is a specific type of diode, commonly used in electronic circuits for its high-speed switching capabilities and low forward voltage drop.

  2. What are the key features of SS3P6-M3/85A?

    • The key features of SS3P6-M3/85A include its small form factor, high switching speed, low power loss, and high reliability.

  3. In what technical solutions is SS3P6-M3/85A commonly used?

    • SS3P6-M3/85A is commonly used in applications such as power supplies, voltage regulators, DC-DC converters, and other electronic circuits requiring fast switching and low power loss.

  4. What is the maximum forward current rating of SS3P6-M3/85A?

    • The maximum forward current rating of SS3P6-M3/85A is typically around 3 amperes, making it suitable for moderate to high-power applications.

  5. What is the reverse recovery time of SS3P6-M3/85A?

    • The reverse recovery time of SS3P6-M3/85A is very short, typically in the range of nanoseconds, allowing for rapid switching and efficient operation.

  6. Does SS3P6-M3/85A require a heat sink for cooling?

    • In most typical applications, SS3P6-M3/85A does not require a heat sink due to its low power loss and efficient design. However, in high-power applications, a heat sink may be recommended.

  7. What is the operating temperature range of SS3P6-M3/85A?

    • The operating temperature range of SS3P6-M3/85A is usually between -55°C to 150°C, making it suitable for a wide range of environmental conditions.

  8. Can SS3P6-M3/85A be used in automotive electronics?

    • Yes, SS3P6-M3/85A is often used in automotive electronics due to its high reliability, fast switching, and ability to operate in harsh environments.

  9. Is SS3P6-M3/85A RoHS compliant?

    • Yes, SS3P6-M3/85A is typically RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive for environmental safety.

  10. Where can I find detailed specifications and application notes for SS3P6-M3/85A?

    • Detailed specifications and application notes for SS3P6-M3/85A can usually be found on the manufacturer's website or in the product datasheet provided by the supplier.