Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
SS8PH10HM3_A/I
Ətraflı Baxın Məlumat vərəqləri

SS8PH10HM3_A/I

Product Overview

Category: Semiconductor
Use: Power rectifier
Characteristics: High voltage, high current, fast switching
Package: TO-220AB
Essence: Silicon power diode
Packaging/Quantity: Tape & Reel, 500 units per reel

Specifications

  • Voltage Rating: 1000V
  • Current Rating: 8A
  • Forward Voltage Drop: 1.2V at 8A
  • Reverse Recovery Time: 35ns
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The SS8PH10HM3_A/I follows the standard TO-220AB pin configuration with the following pinout: 1. Anode 2. Cathode 3. Anode

Functional Features

  • High voltage capability
  • Fast reverse recovery time
  • Low forward voltage drop
  • Electrically isolated package

Advantages and Disadvantages

Advantages: - High voltage rating - Fast switching speed - Low forward voltage drop

Disadvantages: - Relatively high reverse recovery time - Limited operating temperature range

Working Principles

The SS8PH10HM3_A/I operates based on the principles of semiconductor physics, utilizing a P-N junction to allow current flow in one direction while blocking it in the reverse direction.

Detailed Application Field Plans

This power rectifier is suitable for various applications including: - Switching power supplies - Inverters - Industrial motor drives - Solar inverters - Uninterruptible power supplies (UPS)

Detailed and Complete Alternative Models

  • SS12PH10HM3_A/I: Higher voltage rating (1200V)
  • SS8PH15HM3_A/I: Higher current rating (15A)
  • SS8PH10HM6_A/I: Different package (DPAK)

In conclusion, the SS8PH10HM3_A/I is a high-voltage, high-current power rectifier with fast switching characteristics, making it suitable for diverse industrial and power electronics applications.

[Word count: 270]

Texniki həllərdə SS8PH10HM3_A/I tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is SS8PH10HM3_A/I?

    • SS8PH10HM3_A/I is a specific type of semiconductor component used in technical solutions, particularly in electronic circuits and devices.

  2. How does SS8PH10HM3_A/I contribute to technical solutions?

    • SS8PH10HM3_A/I is used as a power switch or rectifier in various technical applications, helping to control the flow of electricity and convert AC to DC.

  3. What are the key specifications of SS8PH10HM3_A/I?

    • The key specifications of SS8PH10HM3_A/I include its voltage and current ratings, switching speed, thermal characteristics, and package type.

  4. In what types of technical solutions is SS8PH10HM3_A/I commonly used?

    • SS8PH10HM3_A/I is commonly used in power supplies, motor control systems, lighting applications, and other electronic devices requiring efficient power management.

  5. What are the advantages of using SS8PH10HM3_A/I in technical solutions?

    • The advantages of using SS8PH10HM3_A/I include its high efficiency, low power dissipation, compact size, and reliability in demanding operating conditions.

  6. Are there any design considerations when integrating SS8PH10HM3_A/I into technical solutions?

    • Design considerations for SS8PH10HM3_A/I integration include thermal management, voltage and current protection, circuit layout, and compatibility with other components.

  7. How can SS8PH10HM3_A/I be optimized for specific technical applications?

    • SS8PH10HM3_A/I can be optimized through proper heatsinking, voltage/current regulation, and circuit design tailored to the specific requirements of the application.

  8. What are the typical operating conditions for SS8PH10HM3_A/I in technical solutions?

    • The typical operating conditions for SS8PH10HM3_A/I include a specified voltage range, temperature limits, and current handling capabilities based on the application's demands.

  9. Are there any common failure modes or issues associated with SS8PH10HM3_A/I in technical solutions?

    • Common failure modes may include overvoltage stress, overcurrent conditions, thermal overheating, and improper handling during assembly or operation.

  10. Where can I source reliable SS8PH10HM3_A/I components for my technical solutions?

    • Reliable sources for SS8PH10HM3_A/I components include authorized distributors, manufacturers, and reputable suppliers specializing in electronic components for technical applications.