Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLZ11-GS08
Ətraflı Baxın Məlumat vərəqləri

TLZ11-GS08 Product Overview

Introduction

The TLZ11-GS08 is a versatile electronic component that belongs to the category of voltage regulators. This entry provides a comprehensive overview of the TLZ11-GS08, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: The TLZ11-GS08 is used to regulate voltage in electronic circuits, ensuring a stable output voltage regardless of input fluctuations.
  • Characteristics: It exhibits high precision, low dropout voltage, and low quiescent current, making it suitable for various applications.
  • Package: The TLZ11-GS08 is available in a small form factor package, facilitating easy integration into electronic designs.
  • Essence: Its essence lies in providing reliable voltage regulation for electronic devices.
  • Packaging/Quantity: Typically packaged in reels or tubes, with varying quantities based on manufacturer specifications.

Specifications

  • Input Voltage Range: 3V to 18V
  • Output Voltage Range: 1.2V to 15V
  • Output Current: Up to 500mA
  • Dropout Voltage: 200mV at 100mA load
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TLZ11-GS08 features a standard three-pin configuration: 1. Input (VIN): Connects to the input voltage source. 2. Ground (GND): Connected to the ground reference. 3. Output (VOUT): Provides the regulated output voltage.

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite variations in the input voltage.
  • Overcurrent Protection: Safeguards against excessive current draw, protecting connected components.
  • Thermal Shutdown: Automatically disables the regulator in case of overheating, preventing damage.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Low dropout voltage
  • Minimal quiescent current consumption
  • Compact form factor

Disadvantages

  • Limited maximum output current compared to higher power regulators
  • Sensitive to input voltage transients

Working Principles

The TLZ11-GS08 utilizes a feedback control mechanism to compare the output voltage with a reference voltage, adjusting the internal circuitry to maintain a constant output voltage.

Detailed Application Field Plans

The TLZ11-GS08 finds extensive use in various electronic applications, including: - Battery-powered devices - Portable electronics - IoT devices - Sensor modules - Wearable technology

Detailed and Complete Alternative Models

  • TL431: Offers similar voltage regulation capabilities in a different package.
  • LM317: Suitable for higher current applications with adjustable output voltage.

In conclusion, the TLZ11-GS08 serves as a reliable voltage regulator with precise control and compact design, catering to a wide range of electronic applications.

Word Count: 411

Texniki həllərdə TLZ11-GS08 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is TLZ11-GS08?

    • TLZ11-GS08 is a high-speed switching diode with fast reverse recovery time, commonly used in high-frequency rectification and freewheeling applications.

  2. What are the key features of TLZ11-GS08?

    • The key features of TLZ11-GS08 include low forward voltage drop, fast reverse recovery time, and high reliability.

  3. What are the typical applications of TLZ11-GS08?

    • TLZ11-GS08 is commonly used in high-frequency rectification, freewheeling diodes in power supplies, and snubber diodes in high-frequency inverters.

  4. What is the maximum forward voltage of TLZ11-GS08?

    • The maximum forward voltage of TLZ11-GS08 is typically around 1V at a forward current of 1A.

  5. What is the reverse recovery time of TLZ11-GS08?

    • The reverse recovery time of TLZ11-GS08 is typically in the range of nanoseconds, making it suitable for high-speed switching applications.

  6. What is the maximum operating temperature of TLZ11-GS08?

    • TLZ11-GS08 is rated for operation up to a maximum temperature of 175°C.

  7. Does TLZ11-GS08 require a heatsink in high-power applications?

    • In high-power applications, it is recommended to use a heatsink to ensure proper thermal management and reliability.

  8. Can TLZ11-GS08 be used in flyback converter circuits?

    • Yes, TLZ11-GS08 can be used in flyback converter circuits due to its fast recovery time and low forward voltage drop.

  9. What is the typical junction capacitance of TLZ11-GS08?

    • The typical junction capacitance of TLZ11-GS08 is in the range of a few picofarads, which is beneficial for high-frequency applications.

  10. Is TLZ11-GS08 RoHS compliant?

    • Yes, TLZ11-GS08 is compliant with the Restriction of Hazardous Substances (RoHS) directive, making it suitable for environmentally friendly applications.