Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TLZ11A-GS18
Ətraflı Baxın Məlumat vərəqləri

TLZ11A-GS18 Product Overview

Introduction

The TLZ11A-GS18 is a semiconductor product belonging to the category of voltage regulator diodes. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator Diodes
  • Use: Stabilizing voltage in electronic circuits
  • Characteristics: High precision, low noise, and excellent temperature stability
  • Package: SOD-123FL
  • Essence: Precision voltage regulation
  • Packaging/Quantity: Available in reels with varying quantities

Specifications

  • Voltage Regulation Range: 2.5V to 36V
  • Forward Current: 100mA
  • Power Dissipation: 250mW
  • Operating Temperature Range: -55°C to 150°C
  • Storage Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The TLZ11A-GS18 has three pins: 1. Anode (A) 2. Cathode (K) 3. Not Connected (NC)

Functional Features

  • Precise voltage regulation
  • Low noise output
  • Excellent temperature stability
  • Fast response time

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Low noise output
  • Wide operating temperature range

Disadvantages

  • Limited forward current capacity
  • Sensitive to reverse voltage

Working Principles

The TLZ11A-GS18 operates by utilizing zener diode characteristics to stabilize voltage within electronic circuits. When the input voltage exceeds the zener voltage, the diode conducts current, effectively regulating the output voltage.

Detailed Application Field Plans

The TLZ11A-GS18 is suitable for various applications, including: - Voltage regulation in power supplies - Signal conditioning in sensor interfaces - Voltage reference in precision measurement equipment

Detailed and Complete Alternative Models

Some alternative models to the TLZ11A-GS18 include: - TL431CDBZR: Programmable Precision Reference - LM4040DIM3X-2.0/NOPB: Precision Micropower Shunt Voltage Reference - REF5025IDGKR: Precision Voltage Reference

In conclusion, the TLZ11A-GS18 is a precision voltage regulator diode with excellent temperature stability and low noise output, making it suitable for a wide range of electronic applications.

Word Count: 298

Texniki həllərdə TLZ11A-GS18 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is TLZ11A-GS18?

    • TLZ11A-GS18 is a high-performance semiconductor component designed for use in technical solutions requiring precise voltage regulation and power management.

  2. What are the key features of TLZ11A-GS18?

    • The key features of TLZ11A-GS18 include low dropout voltage, high accuracy, low quiescent current, and thermal shutdown protection.

  3. In what applications can TLZ11A-GS18 be used?

    • TLZ11A-GS18 is commonly used in battery-powered devices, voltage regulators, portable electronics, and other applications requiring stable voltage output.

  4. What is the maximum input voltage for TLZ11A-GS18?

    • The maximum input voltage for TLZ11A-GS18 is typically around 6V, making it suitable for various low-voltage applications.

  5. How does TLZ11A-GS18 handle thermal management?

    • TLZ11A-GS18 incorporates thermal shutdown protection to prevent overheating, ensuring reliable performance even in demanding operating conditions.

  6. What is the typical output current of TLZ11A-GS18?

    • The typical output current of TLZ11A-GS18 ranges from a few milliamps to several hundred milliamps, depending on the specific application requirements.

  7. Can TLZ11A-GS18 be used in automotive electronics?

    • Yes, TLZ11A-GS18 is suitable for automotive applications where stable voltage regulation is essential for proper operation of electronic systems.

  8. Does TLZ11A-GS18 require external components for operation?

    • TLZ11A-GS18 may require external capacitors and resistors for stability and filtering, depending on the specific circuit design and application requirements.

  9. What are the recommended operating conditions for TLZ11A-GS18?

    • TLZ11A-GS18 operates within a specified temperature range and requires a certain input voltage and load conditions for optimal performance.

  10. Where can I find detailed technical specifications for TLZ11A-GS18?

    • Detailed technical specifications for TLZ11A-GS18 can be found in the product datasheet provided by the manufacturer or distributor.