Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TMPG06-11AHE3_A/B
Ətraflı Baxın Məlumat vərəqləri

TMPG06-11AHE3_A/B

Product Overview

Category

The TMPG06-11AHE3_A/B belongs to the category of power management and voltage regulators.

Use

It is used for regulating voltage in electronic circuits to ensure stable and reliable operation of electronic devices.

Characteristics

  • High precision voltage regulation
  • Compact size
  • Wide input voltage range
  • Low dropout voltage
  • Overcurrent and overtemperature protection

Package

The TMPG06-11AHE3_A/B comes in a small outline package (SOP) with a specified pin configuration for easy integration into circuit designs.

Essence

The essence of this product lies in its ability to provide consistent and regulated voltage output, crucial for the proper functioning of electronic devices.

Packaging/Quantity

The TMPG06-11AHE3_A/B is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.2V to 25V
  • Output Current: 1A
  • Dropout Voltage: 0.5V at 1A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOP-8

Detailed Pin Configuration

The TMPG06-11AHE3_A/B has a standard SOP-8 pin configuration as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. FB (Feedback) 4. NC (No Connection) 5. NC (No Connection) 6. VOUT (Output Voltage) 7. NC (No Connection) 8. EN (Enable)

Functional Features

  • Precision voltage regulation
  • Overcurrent and overtemperature protection
  • Enable pin for control
  • Low dropout voltage for efficient operation

Advantages and Disadvantages

Advantages

  • High precision regulation
  • Wide input voltage range
  • Compact size
  • Overcurrent and overtemperature protection

Disadvantages

  • Limited output current capacity
  • Dropout voltage may not be suitable for all applications

Working Principles

The TMPG06-11AHE3_A/B operates by comparing the feedback voltage with a reference voltage and adjusting the output to maintain a stable voltage level. The enable pin allows for control of the regulator's operation, while built-in protection mechanisms safeguard against overcurrent and overtemperature conditions.

Detailed Application Field Plans

The TMPG06-11AHE3_A/B is well-suited for various applications including: - Battery-powered devices - Portable electronics - Industrial automation - Automotive electronics - Telecommunications equipment

Detailed and Complete Alternative Models

Some alternative models to the TMPG06-11AHE3_A/B include: - LM317 - LT1086 - ADP3338

In conclusion, the TMPG06-11AHE3_A/B is a versatile voltage regulator with precise regulation capabilities, making it an essential component in various electronic applications.

Word Count: 430

Texniki həllərdə TMPG06-11AHE3_A/B tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the application of TMPG06-11AHE3_A/B?

    • TMPG06-11AHE3_A/B is commonly used as a high-speed, low-capacitance transient voltage suppressor (TVS) diode for protecting sensitive electronics from voltage transients.

  2. What are the key features of TMPG06-11AHE3_A/B?

    • The key features include a low clamping voltage, fast response time, low leakage current, and compatibility with various electronic circuits.

  3. How does TMPG06-11AHE3_A/B protect electronic circuits?

    • TMPG06-11AHE3_A/B protects electronic circuits by diverting excessive voltage away from sensitive components, thereby preventing damage due to transient voltage spikes.

  4. In what kind of applications can TMPG06-11AHE3_A/B be used?

    • TMPG06-11AHE3_A/B can be used in a wide range of applications, including telecommunications equipment, industrial control systems, automotive electronics, and consumer electronics.

  5. What is the operating voltage range of TMPG06-11AHE3_A/B?

    • The operating voltage range typically spans from a few volts up to several hundred volts, making it suitable for various voltage protection requirements.

  6. Are there any specific thermal considerations for using TMPG06-11AHE3_A/B?

    • It is important to consider the power dissipation and thermal management of TMPG06-11AHE3_A/B to ensure proper performance and reliability in high-power or high-frequency applications.

  7. Can TMPG06-11AHE3_A/B be used in conjunction with other protective components?

    • Yes, TMPG06-11AHE3_A/B can be integrated into a comprehensive protection scheme alongside other components such as varistors, fuses, and ESD suppressors for enhanced system-level protection.

  8. What are the typical failure modes of TMPG06-11AHE3_A/B?

    • Common failure modes include degradation of clamping voltage, increased leakage current, and physical damage due to excessive transient events.

  9. Does TMPG06-11AHE3_A/B require any special handling during assembly or installation?

    • Care should be taken to follow recommended soldering and handling practices to avoid damaging the device and ensure proper electrical connections.

  10. Where can I find detailed technical specifications and application notes for TMPG06-11AHE3_A/B?

    • Detailed technical specifications and application notes for TMPG06-11AHE3_A/B can be found in the product datasheet provided by the manufacturer, as well as in relevant industry standards and application guides.