Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TZX24A-TAP
Ətraflı Baxın Məlumat vərəqləri

TZX24A-TAP

Introduction

The TZX24A-TAP is a component belonging to the category of semiconductor devices. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Voltage regulation and protection
  • Characteristics: High voltage tolerance, low leakage current
  • Package: SOD-123 package
  • Essence: Zener diode
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Voltage: 24V
  • Power Dissipation: 1.25W
  • Operating Temperature Range: -65°C to +150°C
  • Zener Impedance: 40Ω
  • Maximum Reverse Leakage Current: 5μA

Detailed Pin Configuration

The TZX24A-TAP typically has two pins, with the cathode connected to the ground and the anode connected to the input voltage source.

Functional Features

  • Voltage Regulation: The TZX24A-TAP maintains a constant voltage of 24V across its terminals, providing stability in electrical circuits.
  • Overvoltage Protection: It acts as a protective barrier against voltage spikes, safeguarding sensitive components in the circuit.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • High voltage tolerance
  • Low leakage current

Disadvantages

  • Limited power dissipation capability
  • Susceptible to thermal runaway under high power conditions

Working Principles

The TZX24A-TAP operates based on the principle of the Zener effect, where it allows current to flow in the reverse direction when the applied voltage reaches the specified breakdown voltage, effectively regulating the voltage across the circuit.

Detailed Application Field Plans

The TZX24A-TAP finds extensive use in various applications, including: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping in communication systems

Detailed and Complete Alternative Models

  • TZX24B-TAP: Similar characteristics with a slightly different breakdown voltage
  • TZX24C-TAP: Higher power dissipation capability with comparable voltage regulation properties

In conclusion, the TZX24A-TAP serves as a crucial component in voltage regulation and protection applications, offering precise regulation and overvoltage protection. Its characteristics, working principles, and application versatility make it a valuable asset in diverse electronic systems.

[Word Count: 397]

Texniki həllərdə TZX24A-TAP tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure, here are 10 common questions and answers related to the application of TZX24A-TAP in technical solutions:

  1. What is TZX24A-TAP?

    • TZX24A-TAP is a type of transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and transients.

  2. What is the maximum voltage rating of TZX24A-TAP?

    • The maximum voltage rating of TZX24A-TAP is typically 24V.

  3. What is the peak pulse power handling capability of TZX24A-TAP?

    • TZX24A-TAP can typically handle peak pulse power up to a certain level, such as 400W.

  4. How does TZX24A-TAP protect electronic circuits?

    • TZX24A-TAP clamps transient voltages to a safe level, preventing them from damaging sensitive components.

  5. What are the typical applications of TZX24A-TAP?

    • TZX24A-TAP is commonly used in telecommunications equipment, data lines, and other sensitive electronic devices to protect against voltage surges.

  6. What is the response time of TZX24A-TAP?

    • The response time of TZX24A-TAP is typically very fast, providing quick protection against transient events.

  7. Can TZX24A-TAP be used in automotive applications?

    • Yes, TZX24A-TAP is suitable for use in automotive electronics to protect against voltage transients.

  8. What is the operating temperature range of TZX24A-TAP?

    • TZX24A-TAP is designed to operate within a certain temperature range, typically from -55°C to 150°C.

  9. Does TZX24A-TAP require any external components for proper operation?

    • TZX24A-TAP may require additional circuitry for optimal performance, such as current-limiting resistors or capacitors.

  10. Is TZX24A-TAP RoHS compliant?

    • Yes, TZX24A-TAP is typically RoHS compliant, making it suitable for use in environmentally conscious applications.

These questions and answers should provide a good overview of the application of TZX24A-TAP in technical solutions.