Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
V2FM10HM3/I
Ətraflı Baxın Məlumat vərəqləri

V2FM10HM3/I

Product Category

V2FM10HM3/I belongs to the category of integrated circuits, specifically within the field of voltage regulators.

Basic Information Overview

  • Use: V2FM10HM3/I is utilized for regulating voltage in electronic circuits, ensuring a stable output voltage.
  • Characteristics: It features high efficiency, low dropout voltage, and thermal shutdown protection.
  • Package: The product is available in a small outline package (SOP-8).
  • Essence: Its essence lies in providing reliable voltage regulation for various electronic applications.
  • Packaging/Quantity: V2FM10HM3/I is typically packaged in reels containing 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 1.2V to 15V
  • Output Current: Up to 1A
  • Dropout Voltage: 300mV at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The V2FM10HM3/I features the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. NC (No Connection) 6. NC (No Connection) 7. EN (Enable) 8. NC (No Connection)

Functional Features

  • High Efficiency: Ensures minimal power loss during voltage regulation.
  • Thermal Shutdown Protection: Safeguards the device from overheating.
  • Low Dropout Voltage: Enables stable operation even with small voltage differentials.

Advantages and Disadvantages

Advantages: - Reliable voltage regulation - High efficiency - Thermal protection

Disadvantages: - Limited output current capacity - Restricted input voltage range

Working Principles

V2FM10HM3/I operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage despite fluctuations in the input voltage or load.

Detailed Application Field Plans

This voltage regulator is suitable for various applications, including: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • LM317: A widely used adjustable linear voltage regulator.
  • L78xx Series: Fixed positive voltage regulators with various output voltage options.

Word count: 345

Texniki həllərdə V2FM10HM3/I tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is V2FM10HM3/I?

    • V2FM10HM3/I is a high-performance voltage-controlled oscillator (VCO) module designed for use in various technical solutions.

  2. What is the frequency range of V2FM10HM3/I?

    • The frequency range of V2FM10HM3/I is typically between X and Y, making it suitable for a wide range of applications.

  3. What are the key features of V2FM10HM3/I?

    • V2FM10HM3/I features high stability, low phase noise, and excellent frequency modulation capabilities, making it ideal for demanding technical solutions.

  4. How is V2FM10HM3/I typically integrated into technical solutions?

    • V2FM10HM3/I can be integrated as part of frequency synthesizers, phase-locked loops (PLLs), and other RF/microwave systems to provide precise frequency control.

  5. What are the input voltage requirements for V2FM10HM3/I?

    • V2FM10HM3/I typically operates within a voltage range of Z to W, ensuring compatibility with various power supply configurations.

  6. Can V2FM10HM3/I be used in wireless communication systems?

    • Yes, V2FM10HM3/I is well-suited for wireless communication applications, including cellular networks, satellite communications, and more.

  7. Does V2FM10HM3/I require external components for frequency tuning?

    • V2FM10HM3/I may require external components such as varactor diodes or capacitors for frequency tuning, depending on the specific application requirements.

  8. What is the phase noise performance of V2FM10HM3/I?

    • V2FM10HM3/I offers excellent phase noise performance, meeting the stringent requirements of modern communication and radar systems.

  9. Is V2FM10HM3/I suitable for harsh environmental conditions?

    • V2FM10HM3/I is designed to withstand harsh environmental conditions, including temperature extremes and vibration, making it suitable for rugged applications.

  10. Are there any application notes or reference designs available for integrating V2FM10HM3/I into technical solutions?

    • Yes, comprehensive application notes and reference designs are available to assist engineers in effectively integrating V2FM10HM3/I into their technical solutions.