Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
VBT1080C-M3/8W
Ətraflı Baxın Məlumat vərəqləri

VBT1080C-M3/8W Product Overview

Introduction

The VBT1080C-M3/8W is a versatile electronic component designed for use in various applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: The VBT1080C-M3/8W is used in electronic circuits for power management and voltage regulation.
  • Characteristics: This component is known for its high efficiency, compact size, and reliable performance.
  • Package: The VBT1080C-M3/8W is available in a small form factor package suitable for surface mount applications.
  • Essence: The essence of this component lies in its ability to provide stable and regulated voltage output in various electronic systems.
  • Packaging/Quantity: The VBT1080C-M3/8W is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.6V to 24V
  • Output Current: Up to 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: M3/8W

Detailed Pin Configuration

The VBT1080C-M3/8W features a detailed pin configuration that includes input, output, and control pins. Refer to the product datasheet for specific pinout details.

Functional Features

  • Voltage Regulation: The VBT1080C-M3/8W provides precise voltage regulation, ensuring stable power delivery to connected devices.
  • Overcurrent Protection: This component incorporates overcurrent protection to safeguard against excessive current draw.
  • Thermal Shutdown: It includes thermal shutdown functionality to prevent overheating under high load conditions.

Advantages and Disadvantages

Advantages

  • High efficiency
  • Compact size
  • Wide input voltage range

Disadvantages

  • Limited output current compared to higher-power alternatives
  • Sensitive to improper handling during assembly

Working Principles

The VBT1080C-M3/8W operates on the principle of pulse-width modulation (PWM) to regulate the output voltage based on the input and control signals. It utilizes internal feedback mechanisms to maintain the desired output voltage level.

Detailed Application Field Plans

The VBT1080C-M3/8W is well-suited for a wide range of applications, including: - Portable electronic devices - Automotive electronics - Industrial control systems - Power supplies

Detailed and Complete Alternative Models

  • VBT2080C-M3/10W
  • VBT3080C-M3/12W
  • VBT4080C-M3/15W

These alternative models offer higher power handling capabilities while maintaining similar form factors and functionalities.

In conclusion, the VBT1080C-M3/8W serves as a reliable and efficient electronic component for voltage regulation and power management in diverse electronic systems.

[Word Count: 497]

Texniki həllərdə VBT1080C-M3/8W tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the VBT1080C-M3/8W used for?

    • The VBT1080C-M3/8W is a high-power RF amplifier module commonly used in technical solutions requiring amplification of RF signals.

  2. What is the frequency range of VBT1080C-M3/8W?

    • The VBT1080C-M3/8W operates within the frequency range of 800MHz to 1000MHz, making it suitable for various RF applications within this range.

  3. What is the maximum output power of VBT1080C-M3/8W?

    • The VBT1080C-M3/8W can deliver a maximum output power of 8 watts, providing significant amplification for RF signals.

  4. What are the typical applications of VBT1080C-M3/8W?

    • Typical applications of VBT1080C-M3/8W include use in RF communication systems, radar systems, electronic warfare, and other high-power RF applications.

  5. Does VBT1080C-M3/8W require external cooling?

    • Yes, due to its high-power output, the VBT1080C-M3/8W typically requires external cooling to maintain optimal operating temperatures.

  6. What type of input signal does VBT1080C-M3/8W accept?

    • The VBT1080C-M3/8W accepts RF input signals within its specified frequency range and amplifies them to the desired output power level.

  7. Is VBT1080C-M3/8W suitable for mobile applications?

    • While the VBT1080C-M3/8W provides high-power amplification, its size and power requirements may limit its suitability for mobile applications.

  8. What are the key features of VBT1080C-M3/8W?

    • Key features of VBT1080C-M3/8W include high output power, wide frequency range, compact design, and compatibility with various RF systems.

  9. Can VBT1080C-M3/8W be integrated into existing RF systems?

    • Yes, the VBT1080C-M3/8W is designed for easy integration into existing RF systems, providing enhanced amplification capabilities.

  10. Are there any specific precautions to consider when using VBT1080C-M3/8W?

    • Users should follow proper RF safety guidelines and ensure appropriate handling and installation procedures when integrating VBT1080C-M3/8W into technical solutions.