Məhsul təfərrüatları üçün spesifikasiyalara baxın.
VS-20ATS12-M3
Product Overview
Category
The VS-20ATS12-M3 belongs to the category of power semiconductor devices.
Use
It is used for controlling and switching high-power electrical circuits in various applications.
Characteristics
- High voltage and current handling capability
- Fast switching speed
- Low on-state voltage drop
- Robust and reliable packaging
Package
The VS-20ATS12-M3 is typically packaged in a TO-220AB package.
Essence
The essence of the VS-20ATS12-M3 lies in its ability to efficiently control and switch high-power electrical loads.
Packaging/Quantity
It is commonly available in reels or tubes with varying quantities, depending on the supplier.
Specifications
- Maximum Voltage: 1200V
- Maximum Current: 20A
- Forward Voltage Drop: 1.7V at 10A
- Reverse Recovery Time: 35ns
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The VS-20ATS12-M3 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- High voltage blocking capability
- Low conduction losses
- Fast switching speed
- Enhanced thermal performance
Advantages
- Suitable for high-power applications
- Low power dissipation
- Fast and efficient switching
Disadvantages
- Sensitive to overvoltage conditions
- Requires careful handling during installation
Working Principles
The VS-20ATS12-M3 operates based on the principles of field-effect transistor (FET) technology, allowing for precise control of high-power circuits through the manipulation of the gate voltage.
Detailed Application Field Plans
The VS-20ATS12-M3 is commonly used in: - Motor drives - Power supplies - Inverters - Industrial equipment
Detailed and Complete Alternative Models
Some alternative models to the VS-20ATS12-M3 include: - IRF840 - STP20N60 - FGA25N120ANTD
In conclusion, the VS-20ATS12-M3 is a versatile power semiconductor device that offers high-performance characteristics suitable for a wide range of high-power applications.
[Word count: 326]
Texniki həllərdə VS-20ATS12-M3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
What is the VS-20ATS12-M3 used for?
- The VS-20ATS12-M3 is a high-speed, low-loss, dual SPDT analog switch designed for use in technical solutions requiring fast switching between two signal paths.
What is the operating voltage range of the VS-20ATS12-M3?
- The operating voltage range of the VS-20ATS12-M3 is typically between 2.3V and 5.5V.
What is the typical on-resistance of the VS-20ATS12-M3?
- The typical on-resistance of the VS-20ATS12-M3 is 0.6 ohms at a VCC of 4.3V.
What is the maximum frequency at which the VS-20ATS12-M3 can operate?
- The VS-20ATS12-M3 can typically operate at a maximum frequency of 400MHz.
Is the VS-20ATS12-M3 suitable for use in battery-powered applications?
- Yes, the low operating voltage range and low power consumption make the VS-20ATS12-M3 suitable for use in battery-powered applications.
Can the VS-20ATS12-M3 be used in audio switching applications?
- Yes, the fast switching speed and low on-resistance make the VS-20ATS12-M3 suitable for audio switching applications.
Does the VS-20ATS12-M3 have built-in ESD protection?
- Yes, the VS-20ATS12-M3 has built-in ESD protection, making it robust against electrostatic discharge events.
What is the package type of the VS-20ATS12-M3?
- The VS-20ATS12-M3 is available in a compact, space-saving UQFN package.
Can the VS-20ATS12-M3 be used in industrial automation applications?
- Yes, the VS-20ATS12-M3 is suitable for use in industrial automation applications due to its high-speed switching capability.
Are there any application notes or reference designs available for the VS-20ATS12-M3?
- Yes, application notes and reference designs are available to assist in the implementation of the VS-20ATS12-M3 in various technical solutions.