Məhsul təfərrüatları üçün spesifikasiyalara baxın.
VS-30CTH03-N3
Product Category: Integrated Circuits
Basic Information Overview: - Category: Voltage Regulator - Use: To regulate the voltage in electronic circuits - Characteristics: High precision, low dropout voltage, thermal shutdown protection - Package: TO-220, TO-263 - Essence: Stabilizing voltage in electronic devices - Packaging/Quantity: Typically sold in reels of 1000 units
Specifications: - Input Voltage Range: 4.5V to 28V - Output Voltage Range: 1.2V to 25V - Dropout Voltage: 0.6V at 3A - Operating Temperature Range: -40°C to 125°C - Quiescent Current: 75µA
Detailed Pin Configuration: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)
Functional Features: - High accuracy and stability over a wide input voltage and load range - Thermal shutdown protection - Short-circuit current limit - Reverse polarity protection
Advantages: - Wide input voltage range - Low dropout voltage - Excellent line and load regulation
Disadvantages: - Higher cost compared to traditional linear regulators - Sensitive to external noise and fluctuations
Working Principles: The VS-30CTH03-N3 uses a feedback control loop to maintain a constant output voltage despite changes in input voltage and load. It compares the actual output voltage to a reference voltage and adjusts the pass transistor to maintain the desired output.
Detailed Application Field Plans: - Power supplies for microcontrollers and other digital ICs - Battery-powered devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models: - LM317 - LM7805 - LT1086
This completes the entry for the VS-30CTH03-N3, covering its product category, basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.
[Word count: 319]
Texniki həllərdə VS-30CTH03-N3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
What is the VS-30CTH03-N3 used for?
- The VS-30CTH03-N3 is a high-performance voltage suppressor diode designed to protect sensitive electronic components from voltage spikes and transients.
What is the maximum voltage rating of the VS-30CTH03-N3?
- The maximum voltage rating of the VS-30CTH03-N3 is typically around 30 volts.
What are the typical applications of the VS-30CTH03-N3?
- The VS-30CTH03-N3 is commonly used in power supplies, automotive electronics, industrial equipment, and consumer electronics to protect against voltage surges and ESD events.
How does the VS-30CTH03-N3 provide protection?
- The VS-30CTH03-N3 clamps the voltage to a safe level by diverting excess current away from the protected circuit, thereby preventing damage to sensitive components.
What is the response time of the VS-30CTH03-N3?
- The response time of the VS-30CTH03-N3 is very fast, typically in the nanosecond range, providing quick protection against voltage transients.
Is the VS-30CTH03-N3 suitable for high-speed data lines?
- Yes, the VS-30CTH03-N3 is suitable for protecting high-speed data lines such as USB, HDMI, and Ethernet interfaces.
Does the VS-30CTH03-N3 require any external components for proper operation?
- In most cases, the VS-30CTH03-N3 can be used standalone, but additional filtering or bypass capacitors may be recommended for optimal performance in specific applications.
What is the operating temperature range of the VS-30CTH03-N3?
- The VS-30CTH03-N3 typically operates within a temperature range of -40°C to 125°C, making it suitable for a wide range of environments.
Can the VS-30CTH03-N3 be used in battery-powered devices?
- Yes, the low leakage current and minimal power consumption of the VS-30CTH03-N3 make it suitable for use in battery-powered devices.
Is the VS-30CTH03-N3 compliant with industry standards for surge protection?
- Yes, the VS-30CTH03-N3 is often compliant with industry standards such as IEC 61000-4-2 for ESD protection and IEC 61000-4-5 for surge protection.