Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
VS-32CTQ025SHM3
Ətraflı Baxın Məlumat vərəqləri

VS-32CTQ025SHM3

Product Overview

Category: Schottky Diode
Use: Rectification and voltage clamping
Characteristics: High efficiency, low forward voltage drop, fast switching speed
Package: TO-220AB
Essence: Semiconductor diode
Packaging/Quantity: Tape & Reel / 500 units

Specifications

  • Voltage Rating: 25V
  • Current Rating: 30A
  • Forward Voltage Drop: 0.52V at 15A
  • Reverse Leakage Current: 50µA at 25V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The VS-32CTQ025SHM3 has a standard TO-220AB package with three pins: 1. Anode (A) 2. Cathode (K) 3. Not connected (NC)

Functional Features

  • High current capability
  • Low power loss
  • Fast reverse recovery time
  • High surge capacity

Advantages and Disadvantages

Advantages: - Low forward voltage drop - Fast switching speed - High efficiency

Disadvantages: - Higher cost compared to standard rectifier diodes - Sensitive to temperature variations

Working Principles

The VS-32CTQ025SHM3 operates based on the Schottky barrier principle, where the metal-semiconductor junction provides for faster switching and lower forward voltage drop compared to standard PN-junction diodes.

Detailed Application Field Plans

This diode is commonly used in: - Switching power supplies - DC-DC converters - Reverse polarity protection circuits - Solar panel bypass diodes

Detailed and Complete Alternative Models

  1. SS34: Similar specifications, SMA package
  2. SB560: Higher voltage rating, TO-263 package
  3. MBR3045PT: Higher current rating, TO-247AC package

In conclusion, the VS-32CTQ025SHM3 Schottky diode offers high efficiency and fast switching speed, making it suitable for various power electronics applications. Its characteristics and performance make it a reliable choice for designers seeking efficient rectification and voltage clamping solutions.

Word count: 299

Texniki həllərdə VS-32CTQ025SHM3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum voltage rating of VS-32CTQ025SHM3?

    • The maximum voltage rating of VS-32CTQ025SHM3 is 25V.

  2. What is the maximum current rating of VS-32CTQ025SHM3?

    • The maximum current rating of VS-32CTQ025SHM3 is [insert value here]A.

  3. What is the forward voltage drop of VS-32CTQ025SHM3?

    • The forward voltage drop of VS-32CTQ025SHM3 is typically [insert value here]V at [insert current value here]A.

  4. What is the reverse recovery time of VS-32CTQ025SHM3?

    • The reverse recovery time of VS-32CTQ025SHM3 is typically [insert value here]ns.

  5. What are the typical applications for VS-32CTQ025SHM3?

    • VS-32CTQ025SHM3 is commonly used in power supplies, DC-DC converters, and motor control applications.

  6. What is the operating temperature range of VS-32CTQ025SHM3?

    • The operating temperature range of VS-32CTQ025SHM3 is -55°C to 175°C.

  7. Does VS-32CTQ025SHM3 have any special packaging requirements?

    • VS-32CTQ025SHM3 is available in a standard surface mount package.

  8. What are the key features of VS-32CTQ025SHM3 that make it suitable for technical solutions?

    • VS-32CTQ025SHM3 offers low forward voltage drop, high current capability, and fast reverse recovery time, making it ideal for high-efficiency power conversion applications.

  9. Are there any recommended layout considerations when using VS-32CTQ025SHM3?

    • It is recommended to minimize loop inductance and provide adequate thermal management for optimal performance.

  10. Where can I find detailed specifications and application notes for VS-32CTQ025SHM3?

    • Detailed specifications and application notes for VS-32CTQ025SHM3 can be found in the product datasheet and application notes provided by the manufacturer.