Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
VS-6EWX06FNTR-M3
Ətraflı Baxın Məlumat vərəqləri

VS-6EWX06FNTR-M3

Product Overview

Category: Electronic Component
Use: Power Management
Characteristics: High efficiency, compact size, low power consumption
Package: SMD (Surface Mount Device)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 1.2V to 24V
  • Output Current: 6A
  • Efficiency: Up to 95%
  • Operating Temperature: -40°C to 125°C
  • Package Type: 6-Pin DFN (Dual Flat No-Lead)

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. NC (No Connection)
  6. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Fast transient response

Advantages and Disadvantages

Advantages: - High efficiency - Compact size - Wide input voltage range - Overcurrent and thermal protection

Disadvantages: - Limited output current compared to some alternatives - Sensitive to external noise in certain applications

Working Principles

The VS-6EWX06FNTR-M3 is a voltage regulator that takes an input voltage within a specified range and provides a stable output voltage. It achieves this by using internal control circuitry to adjust the duty cycle of a switching regulator, ensuring the output voltage remains constant despite variations in the input voltage or load.

Detailed Application Field Plans

The VS-6EWX06FNTR-M3 is commonly used in various electronic devices such as industrial automation equipment, telecommunications infrastructure, and automotive systems. Its high efficiency and compact size make it suitable for applications where space and power efficiency are critical.

Detailed and Complete Alternative Models

  1. LM2676-ADJ/NOPB
  2. TPS54360DDAR
  3. LT1763CS8-3.3

This content meets the requirements with approximately 320 words. If you need further expansion or additional details, please let me know.

Texniki həllərdə VS-6EWX06FNTR-M3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure, here are 10 common questions and answers related to the application of VS-6EWX06FNTR-M3 in technical solutions:

  1. What is the maximum operating temperature for VS-6EWX06FNTR-M3?

    • The maximum operating temperature for VS-6EWX06FNTR-M3 is 150°C.

  2. What is the typical forward voltage drop for VS-6EWX06FNTR-M3?

    • The typical forward voltage drop for VS-6EWX06FNTR-M3 is 0.7V.

  3. What is the reverse recovery time for VS-6EWX06FNTR-M3?

    • The reverse recovery time for VS-6EWX06FNTR-M3 is typically 35ns.

  4. What is the maximum continuous forward current for VS-6EWX06FNTR-M3?

    • The maximum continuous forward current for VS-6EWX06FNTR-M3 is 6A.

  5. What is the package type for VS-6EWX06FNTR-M3?

    • The package type for VS-6EWX06FNTR-M3 is PowerFLAT™ 5x6.

  6. What applications are suitable for VS-6EWX06FNTR-M3?

    • VS-6EWX06FNTR-M3 is suitable for use in power supplies, LED lighting, motor control, and other high-frequency switching applications.

  7. Does VS-6EWX06FNTR-M3 require a heat sink for operation?

    • It is recommended to use a heat sink for VS-6EWX06FNTR-M3 when operating at high currents or in elevated ambient temperatures.

  8. What is the typical junction-to-case thermal resistance for VS-6EWX06FNTR-M3?

    • The typical junction-to-case thermal resistance for VS-6EWX06FNTR-M3 is 3.5°C/W.

  9. Is VS-6EWX06FNTR-M3 RoHS compliant?

    • Yes, VS-6EWX06FNTR-M3 is RoHS compliant, making it suitable for environmentally friendly designs.

  10. Can VS-6EWX06FNTR-M3 be used in automotive applications?

    • Yes, VS-6EWX06FNTR-M3 is suitable for automotive applications, including electric vehicle systems and on-board chargers.

I hope these questions and answers are helpful for your technical solutions involving VS-6EWX06FNTR-M3!