Məhsul təfərrüatları üçün spesifikasiyalara baxın.
VS-8ETL06FP-N3
Introduction
The VS-8ETL06FP-N3 is a versatile electronic component that belongs to the category of voltage regulators. This device is commonly used in various electronic applications to regulate and stabilize voltage levels, ensuring consistent and reliable performance of connected circuits and components.
Basic Information Overview
- Category: Voltage Regulator
- Use: Stabilizing and regulating voltage levels in electronic circuits
- Characteristics: High precision, low dropout voltage, thermal shutdown protection
- Package: TO-220, TO-263, D2PAK
- Essence: Ensuring stable and consistent voltage supply
- Packaging/Quantity: Typically available in reels or tubes containing multiple units
Specifications
- Input Voltage Range: 4.5V to 40V
- Output Voltage Range: 1.25V to 37V
- Output Current: Up to 3A
- Dropout Voltage: 1.5V at 3A
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The VS-8ETL06FP-N3 typically features three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage
Functional Features
- High Precision: Provides accurate and stable output voltage
- Low Dropout Voltage: Minimizes power loss and heat dissipation
- Thermal Shutdown Protection: Safeguards the device from overheating
Advantages and Disadvantages
Advantages
- Reliable voltage regulation
- Wide input voltage range
- Thermal protection for enhanced safety
Disadvantages
- Higher dropout voltage compared to some alternative models
- Limited maximum output current
Working Principles
The VS-8ETL06FP-N3 operates based on the principle of feedback control, where it compares the actual output voltage with a reference voltage and adjusts the internal circuitry to maintain the desired output voltage level.
Detailed Application Field Plans
The VS-8ETL06FP-N3 finds extensive application in various electronic systems, including: - Power supplies - Battery charging circuits - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to the VS-8ETL06FP-N3 include: - LM317 - LM7805 - LT1083
In summary, the VS-8ETL06FP-N3 is a crucial component in electronic systems requiring precise voltage regulation, offering reliability and stability in diverse applications.
[Word Count: 398]
Texniki həllərdə VS-8ETL06FP-N3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure, here are 10 common questions and answers related to the application of VS-8ETL06FP-N3 in technical solutions:
Q: What is the maximum data transfer rate supported by VS-8ETL06FP-N3? A: The maximum data transfer rate supported by VS-8ETL06FP-N3 is 1Gbps.
Q: Can VS-8ETL06FP-N3 be used for Power over Ethernet (PoE) applications? A: Yes, VS-8ETL06FP-N3 is designed to support PoE applications, providing power to connected devices such as IP cameras and wireless access points.
Q: What is the maximum distance supported by VS-8ETL06FP-N3 for Ethernet connections? A: VS-8ETL06FP-N3 supports Ethernet connections up to a maximum distance of 100 meters (328 feet).
Q: Is VS-8ETL06FP-N3 suitable for use in outdoor environments? A: No, VS-8ETL06FP-N3 is designed for indoor use and is not suitable for outdoor environments.
Q: Can VS-8ETL06FP-N3 be mounted on a rack or wall? A: Yes, VS-8ETL06FP-N3 can be mounted on a standard 19-inch rack or on a wall for flexible installation options.
Q: Does VS-8ETL06FP-N3 support VLAN (Virtual Local Area Network) configurations? A: Yes, VS-8ETL06FP-N3 supports VLAN configurations, allowing for network segmentation and improved traffic management.
Q: What type of cable is recommended for connecting devices to VS-8ETL06FP-N3? A: It is recommended to use Category 5e or Category 6 Ethernet cables for connecting devices to VS-8ETL06FP-N3.
Q: Can VS-8ETL06FP-N3 be powered using Power over Ethernet (PoE)? A: Yes, VS-8ETL06FP-N3 can be powered using PoE, simplifying installation and reducing the need for additional power outlets.
Q: Does VS-8ETL06FP-N3 support Quality of Service (QoS) features? A: Yes, VS-8ETL06FP-N3 supports QoS features, allowing for prioritization of network traffic to ensure optimal performance for critical applications.
Q: What is the warranty period for VS-8ETL06FP-N3? A: VS-8ETL06FP-N3 comes with a standard warranty period of 1 year from the date of purchase, providing coverage for any manufacturing defects or malfunctions.