Vishay Semiconductor Diodes Division
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
VS-ETU1506STRL-M3
Ətraflı Baxın Məlumat vərəqləri

VS-ETU1506STRL-M3

Category: Electronic Component

Use: The VS-ETU1506STRL-M3 is a voltage regulator module designed for use in electronic circuits to stabilize the voltage and ensure consistent power supply to sensitive components.

Characteristics: This module is known for its high efficiency, low dropout voltage, and compact size. It comes in a protective package that shields it from environmental factors and electrostatic discharge. The essence of this product lies in its ability to provide stable voltage output, ensuring the proper functioning of connected electronic devices.

Packaging/Quantity: The VS-ETU1506STRL-M3 is typically packaged individually and is available in various quantities depending on the manufacturer's specifications.

Specifications: - Input Voltage Range: 4.5V to 28V - Output Voltage Range: 0.8V to 5.5V - Maximum Output Current: 1.5A - Dropout Voltage: 300mV at 1A - Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Enable (EN) - Pin 4: Output Voltage (VOUT)

Functional Features: - Overcurrent Protection - Thermal Shutdown - Short-Circuit Protection - Low Quiescent Current

Advantages: - High Efficiency - Wide Input Voltage Range - Compact Size - Built-in Protection Features

Disadvantages: - Limited Maximum Output Current - Sensitive to Improper Handling

Working Principles: The VS-ETU1506STRL-M3 operates by regulating the input voltage to provide a stable output voltage, even when the input voltage fluctuates. It achieves this through internal circuitry that adjusts the output voltage based on the feedback mechanism.

Detailed Application Field Plans: This module is commonly used in portable electronic devices, battery-powered systems, and IoT devices where a stable power supply is crucial for the proper operation of sensitive components.

Detailed and Complete Alternative Models: - LM317: A widely used adjustable voltage regulator with similar characteristics. - XC6206: A low dropout voltage regulator suitable for low-power applications.

In conclusion, the VS-ETU1506STRL-M3 is a reliable voltage regulator module with high efficiency and built-in protection features, making it suitable for a wide range of electronic applications.

[Word Count: 332]

Texniki həllərdə VS-ETU1506STRL-M3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the VS-ETU1506STRL-M3 used for in technical solutions?

    • The VS-ETU1506STRL-M3 is a voltage suppressor diode designed to protect sensitive electronic components from voltage spikes and transients.

  2. What are the key features of the VS-ETU1506STRL-M3?

    • The key features include low clamping voltage, fast response time, high surge current capability, and compact SOD-123FL package.

  3. How does the VS-ETU1506STRL-M3 provide protection in technical solutions?

    • It provides protection by diverting excess voltage away from sensitive components, preventing damage due to transient events such as lightning strikes or ESD.

  4. What are the typical applications of the VS-ETU1506STRL-M3 in technical solutions?

    • Typical applications include protection of data lines, communication ports, power supplies, and other sensitive circuits in various electronic devices.

  5. What is the maximum clamping voltage of the VS-ETU1506STRL-M3?

    • The maximum clamping voltage is typically around 25V at a peak pulse current of 10A.

  6. What is the operating temperature range of the VS-ETU1506STRL-M3?

    • The operating temperature range is usually between -55°C to 150°C, making it suitable for a wide range of environments.

  7. Does the VS-ETU1506STRL-M3 meet any industry standards for surge protection?

    • Yes, it often meets industry standards such as IEC 61000-4-5 for surge immunity.

  8. Can the VS-ETU1506STRL-M3 be used in automotive applications?

    • Yes, it can be used in automotive electronics for protecting sensitive components from voltage transients.

  9. What are the recommended PCB layout guidelines for the VS-ETU1506STRL-M3?

    • Recommended guidelines include minimizing trace lengths, providing adequate ground connections, and placing the diode close to the protected circuitry.

  10. Are there any special handling considerations for the VS-ETU1506STRL-M3 during assembly?

    • It is important to follow ESD precautions and proper soldering techniques to avoid damaging the diode during assembly.