Communication interface chip UART485/232

Type: Bi-Directional FET Switching Power Supply: Dual Supply Supply Voltage: 3V~9V Quiescent Current (Max): 2uA Maximum Propagation Delay at Different V, Max CL: 10ns@9V, 50pF Logic Level-High: 3.5V~7V Logic Level-Low: 1.5V~3V Operating Temperature: -40℃~+85℃

SN65HVD1785 70-V RS-485 with fault protection, common mode range from -20 to +25

SN74CBTLV1G125 Low-Voltage Single FET Bus Switch

THVD1419 3.3V to 5V RS-485 Transceiver with Surge Protection

High-Performance Silicon-Gate CMOS MC74HC4051A, MC74HC4052A, and MC74HC4053A use silicon-gate CMOS technology to achieve fast propagation delay, low on-resistance, and low off-leakage current. These analog multiplexers/demultiplexers control analog voltages that vary over the full supply range from VCC to VEE. The pin-out of the HC4051A, HC4052A and HC4053A is identical to the metal gate MC14051AB, MC14052AB and MC14053AB. The channel select input determines which analog input/output is connected to the common output/input via an analog switch. When the enable pin is high, all analog switches are off. Channel select and enable inputs are compatible with standard CMOS outputs; with pull-up resistors, they are compatible with LSTTL outputs. These device designs are also more linear in on-resistance (RON) with respect to input voltage than metal-gate CMOS analog switches. For multiplexer/demultiplexers with inhibit current protection, see HC4851A and HC4852A.

5V, 2:1 (SPDT), 4-Channel Analog Switch 14-SOIC -40 to 85

3.3V low power half-duplex RS-485 transceiver with 10Mbps data rate

The NCV7344 CAN transceiver is the interface between the controller area network (CAN) protocol controller and the physical bus. The transceiver provides a differential transmit function for the bus and a differential receive function for the CAN controller. The NCV7344 is a new addition to the family of CAN high-speed transceivers and complements its predecessors such as the NCV734x CAN standalone transceivers and AMIS42665, AMIS3066x. The NCV7344 guarantees additional timing parameters to ensure robust communication at data rates exceeding 1 Mbps to meet CAN flexible data rate requirements (CAN FD). These features make the NCV7344 an excellent choice for all types of HS-CAN networks in nodes requiring a low-power mode with wake-up capability via the CAN bus.

Speech recognition chip, support 50 words, this version is a universal standard program

MIPI® CSI-2/DSI DPHY Retimer for 0°C to 70°C Operation 28-WQFN 0 to 70