Logic device/transceiver/encoder

SN74LVC14A Hex Schmitt Trigger Inverter

SN74HC393 Dual 4-Bit Binary Counter

The MM74HC86 mutually exclusive OR gates are fabricated in an advanced CMOS process and operate at speeds comparable to LS-TTL gates while maintaining the low power consumption and high noise immunity of standard CMOS integrated circuits. The gates are fully buffered with a fanout of 10 LS-TTL loads. The 74HC logic family is functionally and pin-out compatible with the standard 74LS logic family. All inputs are protected against damage due to electrostatic charge by internal diodes clamped to VCC and ground.

CD74HC4094 High-speed CMOS logic 8-level shift-and-store bus register with 3-level outputs

CD4521B CMOS 24-Stage Divider

CD74HC30 High Speed ​​CMOS Logic 8-Input NAND Gate

The MM74HC273 edge-triggered flip-flop utilizes an advanced silicon-gate CMOS process to implement a D-type flip-flop. They feature high noise immunity, low power consumption and higher speed compared to low power Schottky TTL circuits. The device contains 8 master-slave flip-flops with common clock and common clear. Data on the D input that meets setup and hold time requirements is transferred to the Q output on a low-to-high transition of the clock input. Clearing the input low sets all outputs to the low state. Each output is capable of driving a load equivalent to 10 low-power Schottky TTLs. The MM74HC273 is functionally compatible with the 74LS273. Protect all inputs from electrostatic discharge damage by diode-connecting VCC and ground.