Logic device/transceiver/encoder

Dual Input OR Gate

AC/ACT32 contains four 2-input OR gates.

Configurable Multifunction Door 6-SC70 -40 to 125

CD4093B CMOS Quad 2 Input with Non-Schmitt Trigger

2-input XOR gate logic chip

Family of Logic Circuits: 4000B Function: Set and Reset Type: D-type Output Type: Complementary Clock Frequency: 24MHz Max Propagation Delay at Different V, Max CL: 90ns@15V, 50pF Flip-Flop Type: Positive Edge Voltage- Power supply: 3V~15V Quiescent current (Iq): 4uA Input capacitance: 5pF Low-level output current (IOL): 6.8mA High-level output current (IOH): 6.8mA

CD4012B CMOS Dual 4-Input NAND Gate

CD74HC147 High-Speed ​​CMOS Logic 10-to-4-Wire Priority Encoder

SN74AHCT1G02 Single 2-Input Positive-NOR Gate

The VHC123A is an advanced high-speed CMOS Monostable multivibrator fabricated in a silicon-gate CMOS process. It achieves high-speed operation similar to an equivalent bipolar Schottky TTL while maintaining CMOS low power consumption. Each multivibrator has a negative A and a positive B transition trigger input, both of which can be used as inhibit inputs. A clear input is also included, which if asserted low resets the one-shot operation. The VHC123A can be triggered on positive transitions of this clear input while A is held low and B is held high. The output pulse width is determined by this formula: PW = (Rx)(Cx); where PW is seconds, R is ohms, and C is degrees Fahrenheit. Rx and Cx limits are: External Capacitor, CxNo Limit External Resistor, Rx VCC = 2.0V, 5 kohm Min VCC > 3.0V, 1 kohm Min An Input protection circuit ensures that 0 to 7V can be applied to the input pin, Regardless of the supply voltage. This device can be used to interface 5V systems with 3V systems and both power systems, such as battery backup. This circuit prevents damage to the device due to mismatched supply and input voltages.

SN74LVC1G132 Single 2-Input NAND Gate with Schmitt Trigger Inputs