Logic device/transceiver/encoder

Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
Təsvir
64711 PCS
Stokda
Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
Təsvir
57591 PCS
Stokda
Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
4-Channel, 2-Input, 2V to 5.5V NOR Gate 14-SOIC -40 to 125
Təsvir
89031 PCS
Stokda
Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
4-Channel, 4-Input, 2V to 6V NAND Gate with Schmitt Trigger Inputs 14-SOIC -40 to 85
Təsvir
91329 PCS
Stokda
Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
4-Channel, 2-Input, 3V to 5.5V OR Gate 16-SOIC -40 to 85
Təsvir
76471 PCS
Stokda
Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
4-Channel, 2-Input, 3V to 18V NAND Gate 14-TSSOP -55 to 125
Təsvir
60630 PCS
Stokda
Hissə nömrəsi
rochester
İstehsalçılar
Təsvir
63583 PCS
Stokda
Hissə nömrəsi
ADI
İstehsalçılar
Təsvir
68748 PCS
Stokda
Hissə nömrəsi
Nexperia
İstehsalçılar
Təsvir
56169 PCS
Stokda
Hissə nömrəsi
onsemi (Ansemi)
İstehsalçılar
MM74HCT573 Octal D-type Latch and MM74HCT574 Octal D-type Flip-Flop are manufactured with advanced silicon gate CMOS technology, which has the inherent advantages of low power consumption and wide power supply range, and has LS-TTL input and output characteristics, and realizes pin output compatible. The 3-state outputs can drive 15 LS-TTL loads. All inputs are protected from electrostatic discharge damage by internal diodes to VCC and ground. When the MM74HCT573 latch enable input is high, the Q output will follow the D input. When Latch Enable goes low, the data at the D input remains at the output until Latch Enable goes high again. When a high logic level is applied to the output control input, all outputs go into a high impedance state, regardless of what signals are present at the other inputs and the state of the storage element. The MM74HCT574 is a rising edge triggered flip-flop. Data on the D input that meets setup and hold time requirements is transferred to the Q output on a positive-going transition of the clock (CK) input. When a high logic level is applied to the output control (OC) input, all outputs go into a high-impedance state, regardless of the signals present at the other inputs and the state of the storage elements. The MM74HCT device is suitable for interfacing between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.
Təsvir
83673 PCS
Stokda
Hissə nömrəsi
onsemi (Ansemi)
İstehsalçılar
Təsvir
95769 PCS
Stokda
Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
Octal Bus Transceiver 20-SSOP 0 to 70
Təsvir
84156 PCS
Stokda
Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
Octal Bus Transceiver and Registers with 3-State Outputs 24-TSSOP -40 to 85
Təsvir
90163 PCS
Stokda
Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
16-Bit Transparent D-Latch with 3-State Output 48-TVSOP -40 to 85
Təsvir
52214 PCS
Stokda
Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
Təsvir
85670 PCS
Stokda
Hissə nömrəsi
TI (Texas Instruments)
İstehsalçılar
IEEE Std 1149.1 (JTAG) Boundary-Scan Test Set 24-SOIC 0 to 70 with Octal Bus Transceivers
Təsvir
54209 PCS
Stokda
Hissə nömrəsi
ADI/MAXIM (MAXIM)
İstehsalçılar
Təsvir
85798 PCS
Stokda
Hissə nömrəsi
ADI/MAXIM (MAXIM)
İstehsalçılar
Təsvir
93941 PCS
Stokda
Hissə nömrəsi
ADI/MAXIM (MAXIM)
İstehsalçılar
Təsvir
63060 PCS
Stokda
Hissə nömrəsi
NXP (NXP)
İstehsalçılar
Təsvir
58949 PCS
Stokda