Power chip

5V/100mA PFM Asynchronous Step-up Converter

2-4 Cells Overvoltage Protector with LDO Output 8-WSON -40 to 110

DC-DC module, input range: 9V~18V, dual output: ±5V/±600mA

4.2V

Single Cell High Efficiency PFM Synchronous Boost DC/DC Converter

Linear voltage regulator chip @@1.5uA static power consumption, 40V withstand voltage, 300mA output voltage regulator LDO

1-Cell Li-Ion/Li-Polymer Battery Protection IC

LP38798 LP38798-ADJ Hi PSRR Ultra Low Noise 800mA Low Input Voltage Regulator for RF/An

Isolated power module: input range AC85~265V/DC100~370V, output 24V, 5W, isolation voltage greater than 2.5kVAC, standard size, industrial grade, standby power consumption about 0.15W, TA5~10 series module power efficiency up to 80%, DIP :48*36*20

The NCP1063 integrates a fixed frequency current mode controller and 700 V MOSFETs. Available in a PDIP™7 or SOIC-16 package, the NCP1063 offers a high level of integration including soft-start, frequency dithering, short-circuit protection, cycle skipping, adjustable peak current set point, slope compensation, and dynamic self-power supply (no auxiliary winding required). Unlike other monolithic solutions, the NCP1063 is noiseless: it switches at a usable frequency (65 or 100 kHz) during normal load operation. When the output power demand disappears, the IC will automatically enter frequency foldback mode, providing excellent energy efficiency at light loads. When power demand decreases further, it enters skip mode, reducing standby power consumption to no-load conditions. Protection features include: timers to detect overload or short circuit events, overvoltage protection with automatic recovery, and AC input line voltage detection (A version). ON Semiconductor's proprietary integrated Over Power Protection (OPP) allows you to take full advantage of the highest power available with only an external resistor, without compromising standby performance. The NCP1060/NCP1063 family can be used seamlessly in both non-isolated and isolated topologies.

17V Input Buck Converter with Low Power Mode Input for Intel SkyLake Platform 16-VQFN -40 to 85

It is a full-bridge drive chip, a wide-voltage input range, and a control circuit for high-current DC brush motor drive