Power chip

1-Cell 1-A Li-Ion Battery Charger 10-HVSSOP -40 to 150 with 100-kΩ NTC Operating Within JEITA Specifications

150mA Low Noise Low Dropout Voltage Regulator with Shutdown Mode 5-SOT-23 -40 to 125

Input Voltage: 21.6-26.4Vdc\nOutput Voltage: 24V\nOutput Current: 0.083A\nOutput Power: 2W\nIsolation Voltage: 1500VDC\nConversion Efficiency: 90%\nFeature: Output Short Circuit Protection

Adjustable output 5V~20V

Dual-channel H-bridge current-controlled motor driver: single or dual brushed DC motors; one stepper motor; fully independent half-bridge control. Industry standard IN/IN digital control interface. Low on-resistance MOSFET: 2.5A maximum drive current at 24V, Ta = 25°C; 350mΩ RDS(on) at 24V, Ta = 25°C (typ. HS + LS). Built-in 3.3V reference voltage. Surface mount encapsulation with heat sink. Protection Features: Over-Current Protection (OCP); Thermal Shutdown (TSD); Under-Voltage Lockout (UVLO); Fault Display Pin (nFAULT).

12V/24V/299mA non-isolated Buck CT external Vcc capacitor and diode

500mA Low IQ Small Low Dropout (LDO) Regulator 4-X2SON -40 to 125

Power 5W Input Voltage Range 85-264Vac\n100-370Vdc Output Voltage/Current (Vo/lo) 24V/0.21A Efficiency% 78

14uA static power consumption, 18V withstand voltage, 1A current output, high ripple rejection ratio

TPS548A20 4.5V to 25V Input, DCAP3 Mode, 15A Synchronous Step-Down SWIFT™ Converter